Tascam US-16x08 USB Interface for Mac Windows & iOS

The TASCAM US-16x08 captures 16 mic and line inputs to your computer with clear sound quality and advanced features to manage big sessions. Eight Ultra-HDDA microphone preamps deliver the cleanest and quietest operation in their class while delivering up to 56dB of gain. An additional eight line inputs are provided, two of them switchable to instrument level for direct guitar or bass recording. Eight balanced line outputs are also available, two with a level control on the front panel for monitoring. Built into the US-16x08 is a DSP Mixer for low-latency digital mixing. Each channel has four-band EQ and compression for polished-sounding monitor mixes. In addition to interface mode, the US-16x08 can be used stand alone as a standalone mic preamp. Mac and Windows drivers are provided, as well as USB Class Compliant 2.0 drivers for tablets like Apple's iPad. MIDI input and output are also available on the rear panel. Whether using the ergonomically-designed angled desktop stand or mounting with the included rack ears, the US-16x08 includes analog I/O for almost any music recording application. TASCAM's own Ultra-HDDA mic preamps are the cleanest, quietest, and best-sounding from any interface in their range. A gain range of 56dB makes them ideal for any type of mic – dynamic, condenser, or ribbon. With preamp performance well beyond any interfaces in their price range, the Ultra-HDDA preamps on the US-16x08 makes your tracks sound like a record. The eight XLR mic inputs have switchable +48V phantom power to use up to 8 condenser mics at the same time. The two front panel TRS line inputs are switchable between instrument level and line level input with adjustable gain. An additional six TRS line ins on the rear of the unit are switchable between -10dB and +4dB. All of the jacks support balanced or unbalanced 1/4" signals. When powered on with out a USB connection, the US-16x08 functions as an 8-channel microphone preamp. Mics pass through the Ultra-HDDA preamps to the eight balanced line outputs on the rear panel. Use the interface to add additional high-quality mic inputs to a mixer an another audio interface. Digital processing features like the DSP Monitor Mixer and advanced USB drivers make sessions with the US-16x08 comfortable for the musicians and engineer. The DSP Mixer includes processing for a polished-sounding headphone mix without latency delay from your DAW software, fuelled by a Blackfin DSP processor. And new drivers, re-written from the ground up, provide better compatibility and performance on Mac, Windows and iPad recording systems. The converters and electronics on the US-16x08 allow you to record at audio resolutions up to 96kHz/24-bit for detailed acoustic productions. No matter what your session's sample rate is set for, the high-quality analog and digital design make your recordings sound their best. Powered by an Analog Devices BlackFin DSP processor, the US-16x08 includes an advanced digital mixer for monitor mixing. Each input includes 4-band EQ, a low-cut filer, and compressor. The DSP mixer can store up to 10 snapshots as scenes - making it easy to recall mixer settings. An additional tab opens a digital patchbay to route signals to any output. The US-16x08 includes an all-new driver architecture, written in-house by TASCAM engineers. The Windows driver software can be installed without connecting the interface, with simple on-screen instructions. Mac users can use the interface without installing a driver at all. Simply install the control panel software in order to change device settings. Finally, the class-compliant driver allows it to be used with tablets like Apple's iPad. (Requires Apple's Camera Connection Kit for USB connection). Features Ultra-HDDA (High Definition Discrete Architecture) mic preamps with −125dBu EIN Eight Ultra-HDDA mic pres with XLR connectors, eight TRS inputs Standalone mode for use as an independent mic preamp Up to 96kHz/24-bit recording Support for Windows and Macintosh USB 2.0 computer connection Connect with iPads and other iOS devices via Class Compliant drivers +48V phantom power available for all microphone inputs High-impedance inputs available 56 dB of preamp gain, ideal for dynamic or ribbon microphones Tough metal casing for durability Angled design provides excellent usability on a desktop Eight TRS outputs Standard TRS headphones output jack with 70mW/ch output power Separate controls for line and headphones output volumes MIDI input and output Low-latency monitoring via on-board DSP mixer DSP mixer with 4-band EQ and compression on each input channel Digital Patch bay allows outputs to be assigned freely Scenes can store DSP mixer settings (up to 10 scenes can be stored and named) USB class compliant 2.0 support Confirmed operation with major DAW software (SONAR, ProTools, Cubase, Live, Studio One, Garage Band) RoHS certified Dedicated AC adapter included For more information, please visit the manufacturer's website