Cisco RV082 Dual-WAN Load Balancer & 8-Port VPN Router

The Cisco RV082 Dual-WAN Load Balancer and VPN Router is an advanced connection-sharing network solution for your small business needs. Like any router, it lets multiple computers in your office share a connection to a public or private network. However, with dual WAN ports, the Cisco RV082 Dual-WAN Load Balancer lets you use a second connection as a backup to help you stay connected, or it can be used to access a second provider to increase available bandwidth and balance traffic. Key Features SPI firewall for maximum security Two dedicated WAN ports for load-balanced connectivity to the Internet 8-port 10/100 switch supports automatic medium dependent interface (MDI), MDI crossover (MDI-X) and up to 200 Mbps of throughput per port IP filtering allows for restricted access to the Internet and other network resources Full IPsec VPN capability using Data Encryption Standard (DES) and Triple DES (3DES) encryption algorithms Support for MD5 and SHA authentication algorithms Allows up to 100 simultaneous IPsec VPN tunnels Management via web, Simple Network Management Protocol (SNMP), and setup wizards for easy setup by administrators Bandwidth management capabilities for improved quality of service (QoS) Supports up to 50 QuickVPN users Limited lifetime warranty Built-in 8-Port Switch and VPN Tunnels The Cisco RV082 Dual-WAN Load Balancer also features a built-in 8-port full-duplex 10/100 Ethernet switch to connect eight PCs directly, or you can connect more hubs and switches to create as big a network as you need. The VPN capability creates encrypted "tunnels" through the Internet, allowing up to 100 remote offices or traveling users to securely connect into your office network from offsite. Users connecting through a VPN tunnel are attached to your company's network -- with secure access to files, email, and your intranet -- just as if they were in the building. You can also use the Cisco RV082 Routers VPN capability to allow users on your small office network to securely connect out to a corporate network. IP address filtering and Robust Firewall The Cisco RV082 Dual-WAN Load Balancer can serve as a Dynamic Host Configuration Protocol (DHCP) server and has a powerful stateful packet inspection (SPI) firewall to protect your PCs against intruders and most known Internet attacks. It can be configured to filter internal users' access to the Internet and has IP address filtering so you can specify exactly who can connect to your network. Configuration is a snap with the web browser-based configuration utility. As the heart of your small office network, the connection-redundant Cisco RV082 Dual WAN VPN Router gives you the connection reliability your business needs. Specifications Standards IEEE 802.3, 802.3u Ports Eight 10/100 RJ-45 ports, one 10/100 RJ-45 Internet port, one 10/100 RJ-45 DMZ/Internet port Buttons Reset Cabling Type Category 5 Ethernet LEDs System, Internet, DMZ/Internet, DMZ Mode, Diag, 1 through 8 Universal Plug and Play (UPnP) able/certified Certified Security features SPI firewall, DES, 3DES, and Advanced Encryption Standard (AES) encryption for IPSec VPN tunnel Operating system Linux Performance NAT throughput 200 Mbps IPsec throughput 97 Mbps Security Firewall SPI firewall Denial-of-service (DoS) prevention Blocks various DoS attacks Access rules Up to 50 entries Port forwarding Up to 30 entries Port triggering Up to 30 entries URL filtering Static list by domain or keywords (included), dynamic filtering through Cisco ProtectLink Web security service optional) Network Dual WANs Can be configured for Smartlink backup or load balancing WAN type DHCP, static IP, Point-to-Point Protocol over Ethernet (PPPoE), Point-to-Point Tunneling Protocol (PPTP), Telstra BigPond, Dynamic DNS Protocol binding Protocols can be bound to a particular WAN port under load balancing DHCP DHCP server, DHCP client, DHCP relay DNS DNS proxy, Dynamic DNS (DynDNS, 3322, PeanutHull) NAT Many-to-one, one-to-one Network edge (DMZ) DMZ port, DMZ host Routing static and Routing Information Protocol (RIP) Static and RIP versions 1 and 2 QoS Port-based QoS Configurable per LAN port Service-based QoS Supports rate control or priority Rate control Upstream/downstream bandwidth can be configured per service Priority Each service can be mapped to one of the 3 priority levels VPN IPsec 100 IPsec tunnels for branch office connectivity QuickVPN 50 QuickVPN users for remote client access PPTP Built-in PPTP server supporting 5 PPTP clients Encryption DES, 3DES, AES-128, AES-192, AES-256 Authentication MD5, SHA1 Internet Key Exchange (IKE) Supports IKE IPSec NAT Traversal (NAT-T) Supported for gateway-to-gateway and client-to-gateway tunnels Advanced options Dead peer detection (DPD), split DNS, VPN backup VPN pass-through PPTP, L2TP, IPsec Management Web-based HTTPS, SSL SNMP Supports SNMP versions 1 and 2c Log/monitoring Syslog, email alert, VPN tunnels status monitor Environmental Dimensions W x H x D 1 x 1.75 x 9.50 in. (279.4 x 44.45 x 241.3 mm) Weight 3.25 lb (1.475 kg) Power AC 100~240V, 50~60 Hz Certification FCC Class B, CE Class B Operating temperature 32° to 104°F (0° to 40°C) Storage temperature 32° to 158°F (0° to 70°C) Operating humidity 10% to 85%, noncondensing Storage humidity 5% to 90%, noncondensing Package Contents • Cisco RV082 Dual WAN VPN Router • AC power cable • Setup CD with user guide in PDF format and QuickVPN client software • Registration card • Rack-mounting kit Minimum Requirements Broadband connection for Internet connection sharing Network adapter with Ethernet network cable and TCP/IP installed per PC · Web-based configuration: Java/cookies/SSL-enabled web browser