Brand:3D META
At JB Hi-Fi In stock
Same price since 6 Nov
Unchanged since we started tracking
We may earn a commission at no cost to you. How it works
Tracking since 6 Nov · 13 days
The price hasn't changed since we started tracking it. We'll show its history once it does.
Carbon Fibre PA6 (Nylon) 3D Printing Filament
3D META's PA6-CF 3D printing filament combines the toughness of PA6 nylon with 10% chopped carbon fibre, producing parts with outstanding stiffness, strength and heat resistance. With a heat deflection temperature of around 200oC and a flexural modulus more than four times that of standard PLA, PA6-CF is the material to reach for when a part has to carry real load in a hot environment - brackets, mounts, jigs, drone frames and under-bonnet components. Like all 3D META filaments, it is manufactured to strict quality standards and supplied on a recyclable plastic spool.
Key Features of PA6-CF 3D Printing Filament
Applications for PA6-CF 3D Printing Filament
Note: PA6-CF is abrasive and hygroscopic. Use a hardened steel or wear-resistant nozzle, dry the filament before every print, and print from a dry box or dryer for best results. An enclosed printer is strongly recommended.
Storage and Drying for PA6-CF Filament
PA6 absorbs moisture quickly, and wet nylon prints with bubbles, stringing and poor strength:
Why Choose 3D META's PA6-CF 3D Printing Filament
Need maximum stiffness and heat resistance? Order 3D META PA6-CF filament today. Looking for lower moisture absorption and better chemical resistance instead? See our PA12-CF filament.
Print Settings
Recommended starting settings for 3D META PA6-CF filament. Every printer is different - treat these as a guide and tune for your machine.
Setting Recommended Nozzle Temperature 270-290oC Bed Temperature 60-90oC Print Speed 40-60 mm/s Part Cooling Fan 50-100% Layer Height 0.12-0.3 mm Retraction Distance 4-6 mm Retraction Speed 40-60 mm/s Nozzle Hardened steel or wear-resistant, 0.4 mm or larger Print Surface Most print surfaces e.g. Glass, META FLEX etc Printing Environment Room Temperature - 50oC (enclosure recommended) Support Material PVA Drying (before printing) 80oC for a minimum of 12 hours
Technical Specs
Property Test method Value Filament Material PA6 (Nylon) with 10% carbon fibre Diameter 1.75 mm (0.02 mm) Net weight 1 kg Colour Black Spool Recyclable plastic spool Physical Properties Density ISO 1183 1.24-1.26 g/cm3 MFR (250oC / 2.16 kg) ISO 1133 3-6 g/10 min Moisture Absorption ISO 62 <0.3% Mechanical Properties Tensile Strength ISO 527 63-67 MPa Elongation at Break ISO 527 16.5-17.5% Flexural Modulus ISO 527 4300-4800 MPa Flexural Strength ISO 178 140-145 MPa Impact Strength ISO 179 11.5-13.5 kJ/m2 Thermal Properties HDT @ 0.455 MPa (66 psi) ISO 75 200oC Continuous Use Temperature IEC 60216 150oC 200-hour Continuous Test 180oC
Download the full PA6-CF Technical Data Sheet (PDF).
FAQ's
Q: Do I need a special nozzle for printing with PA6-CF filament?
A: Yes. Use a hardened steel or other wear-resistant nozzle. The carbon fibre content will quickly wear out a standard brass nozzle, widening the orifice and ruining dimensional accuracy.
Q: What is the main difference between PA6-CF and PA12-CF?
A: PA6-CF is the stiffer, stronger and more heat-resistant of the two (HDT 200oC vs 90oC), making it the better choice for structural parts and hot environments. PA12-CF absorbs less moisture, has better chemical resistance and is more dimensionally stable, so it is easier to print and better suited to parts exposed to oils, fuels or humidity.
Q: Do I need an enclosed printer?
A: Strongly recommended. PA6 is prone to warping on open-frame printers; a heated enclosure keeps the part warm and greatly improves layer adhesion and flatness.
Q: How should I store PA6-CF filament?
A: Store it vacuum-sealed or in an airtight container with desiccant, and dry it at 80oC for at least 12 hours before printing. PA6 absorbs moisture within hours of being exposed to air, so printing from a dry box or active dryer gives the most consistent results.