Brand:3D META
At JB Hi-Fi In stock
Same price since 6 Nov
Unchanged since we started tracking
We may earn a commission at no cost to you. How it works
Tracking since 6 Nov · 13 days
The price hasn't changed since we started tracking it. We'll show its history once it does.
PETG Glitter 3D Printing Filament
3D META's PETG Glitter 3D printing filament adds eye-catching sparkle to the tough, easy-to-print properties of premium PETG. Suspended glitter particles are embedded throughout the filament, producing prints with a subtle shimmer that catches and reflects light from every angle. Built on a premium PETG base, PETG Glitter combines that decorative effect with excellent layer adhesion, impact resistance, and low warping - making it the perfect choice for ornaments, jewellery, props, and any project that should sparkle. Like all 3D META filaments, PETG Glitter is manufactured to strict quality standards and supplied on recyclable plastic spools.
Key Features of PETG Glitter 3D Printing Filament
Applications for PETG Glitter 3D Printing Filament
PETG Glitter is ideal for makers and designers who want a sparkling visual effect with the strength to back it up:
Note: For the strongest sparkle effect, use a 0.6 mm or larger nozzle. Glitter particles can clog very small nozzles (0.2-0.3 mm), so we recommend 0.4 mm and above for trouble-free printing.
Storage and Drying for PETG Glitter Filament
PETG absorbs moisture from the air and prints best when stored properly:
Why Choose 3D META's PETG Glitter 3D Printing Filament
Ready to add a little sparkle to your 3D prints? Order 3D META PETG Glitter filament today and bring shimmering, light-catching detail to your next project.
Print Settings
Recommended starting settings for 3D META Glitter PETG filament. Every printer is different - treat these as a guide and tune for your machine.
Setting Recommended Nozzle Temperature 220-240oC Bed Temperature 25-80oC Print Speed 40-60 mm/s Part Cooling Fan 0-50% Layer Height 0.12-0.3 mm Retraction Distance 1-2 mm Retraction Speed 30-50 mm/s Print Surface Most print surfaces e.g. Glass, META FLEX etc Printing Environment Room Temperature - 50oC Support Material Itself Drying (before printing) 70oC for a minimum of 5 hours
Technical Specs
Property Test method Value Filament Material Glitter PETG Diameter 1.75 mm (0.02 mm) Net weight 1 kg Spool Recyclable plastic spool Physical Properties Density ISO 1183 1.27-1.28 g/cm3 MFR (250oC / 2.16 kg) ISO 1133 4-6 g/10 min Moisture Absorption ISO 62 <0.2% Mechanical Properties Tensile Strength ISO 527 41.5-44.5 MPa Elongation at Break ISO 527 10-12% Flexural Modulus ISO 527 1400-1500 MPa Flexural Strength ISO 178 64.5-66 MPa Impact Strength ISO 179 5-6 kJ/m2 Thermal Properties HDT @ 0.455MPa (66 psi) ISO 75 74oC Continuous Use Temperature IEC 60216 70oC
FAQs
Print at 220-240oC with a heated bed at 25-80oC. Standard PETG settings work well - no special tuning needed for the glitter effect.
For best results we recommend a 0.4 mm nozzle or larger. The glitter particles can clog 0.2-0.3 mm nozzles, so smaller nozzles are not recommended.
No. The glitter particles are embedded throughout the filament, not coated on the surface. The sparkle effect is permanent and stays visible even if prints are handled or lightly worn.
No. While base PETG can be food-safe under certain conditions, the glitter additives mean PETG Glitter is not recommended for direct food contact. Use a dedicated food-safe filament or coating for those applications.