Brand:3D META
At JB Hi-Fi In stock
Same price since 6 Nov
Unchanged since we started tracking
We may earn a commission at no cost to you. How it works
Tracking since 6 Nov · 12 days
The price hasn't changed since we started tracking it. We'll show its history once it does.
Support Filament for PLA and PETG Filament
3D META's Support Filament is a specialist break-away support material designed for use alongside PLA and PETG in dual-extrusion 3D printers. Engineered to form a deliberately weak bond with PLA and PETG, this filament makes overhangs, bridges, and complex geometries easy to print - then peels cleanly away from the finished part, leaving a smooth interface surface with no chemical removal or post-processing soak required. The result is dramatically improved surface quality on overhang faces, faster post-processing, and the ability to print geometries that would otherwise require painful manual support cleanup. Like all 3D META filaments, our Support Filament is supplied on recyclable plastic spools and manufactured to strict quality standards.
Key Features of 3D META Support Filament
Applications for 3D META Support Filament
This support filament is the right choice for anyone using a dual-extrusion printer who wants better surface quality and less post-processing time:
Note: Support Filament is designed for dual-extrusion (IDEX or dual-hotend) 3D printers. Slicer configuration is required to assign supports to the second extruder. Compatible with most major slicers including Bambu Studio, OrcaSlicer, PrusaSlicer, and Cura.
Storage and Drying for Support Filament
Like all 3D printing filaments, performance is best when stored dry:
Why Choose 3D META's Support Filament
Ready to transform your dual-extrusion prints with clean, easy-removal supports? Order 3D META Support Filament today and unlock the full potential of your dual-extrusion 3D printer.
Print Settings
Recommended starting settings for 3D META Support (for PLA & PETG) filament. Every printer is different - treat these as a guide and tune for your machine.
Setting Recommended Nozzle Temperature 220-240oC Bed Temperature 35-50oC
Technical Specs
Property Value Filament Material Support 3D Filament (for PLA & PETG) Diameter 1.75 mm (0.02 mm) Net weight 1 kg Spool Recyclable plastic spool
FAQs
No. This is a break-away support material - it's removed mechanically by peeling or snapping it off. There's no water bath or solvent needed.
A dual-extrusion 3D printer (IDEX or dual-hotend setup). The model material (PLA or PETG) is printed on one extruder; the support filament on the second extruder, assigned via your slicer.
Print at 220-240oC with a heated bed matched to your model material (60oC for PLA, 75-85oC for PETG). Use the same nozzle settings as your PLA or PETG base profile.
Yes. The support filament is compatible with all 3D META PLA and PETG variants, including PLA+ HS, Galactic PLA, Galactic PETG, and our other PLA and PETG products.