Brand:ㅤ
Last price at PC LANseen today
Not available at any store we track right now
We may earn a commission at no cost to you. How it works
Tracking since 9 Nov · 9 days
The price hasn't changed since we started tracking it. We'll show its history once it does.
The new KONIX small diameter CAT6A cable is a great solution for high density patching applications. It improves the cable density and provides less cross section area. This helps improve air flow and rack ventilation. The data rate of this cable is rated to 10Gbps with a bandwidth of up to 500Mhz. It’s high performance is ensured with individual Fluke component test. It’s ready for your project use.
Features:
The KONIX small diameter CAT6A cable is constructed with a F/UTP cable which contains a foil shield under the cable jacket. Inside this CAT6A F/UTP cable, each pair of cable is twisted and separated by a cross separator. All 4 unshielded pairs are wrapped with a metal foil. The foil shield can act to prevent EMI/RFI from the adjacent cables or equipment. Moreover, the foil shield can also prevent the data from leaking out of the cable.
All KONIX CAT6A small diameter cables pass the ACMC lab tests and Fluke DSX-8000 component level tests. They are all with the RCM marking and ready for project /data centre uses
Nominal cable jacket OD is 4.6mm. Compared to the 26AWG S/FTP CAT6A cable, this small diameter CAT6A cable reduces the cable size by 24% . It has 38% smaller cross section area.
With LSZH Jacker - LSZH (Low Smoke Zero Halogen). The Low smoke zero halogen cable is popular as it is environmentally friendly, flame-retardant, resistant and ageing, which can provide fire safety and emits less toxic gas in case of burning. It is required by most data centres today.
The KONIX CAT6A S/FTP cable plug features a snagless design which can protect the locking clips on the RJ45 connectors from being damaged or snapped off during installation
Meets Category 6A plug to plug electrical and transmission parameters.
Foil Shielded ( F/UTP ) with drain wire design for EMI/RFI protection.
The RJ45 plug used for this cable has 50 micron Gold Plated contacts which offers maximum data performance and corrosion resistance.

Application
Specifications
RJ45 Plug
Strain Relief
Cable
The cable performance complies with the IEC 61156-5 requirement
Cable Wiring

Available Colours:

Available lengths:
Installation Information
| Installation Temperature | 0˚C to 50˚C |
| Storage Temperature | -40˚C to 60˚C |
| Operating temperature | -20˚C to 60˚C |
| Pulling Tension | Max. 100N |
| Band radius | Min. 180mm |
| UL Temperature Rating | 75˚C |
Electrical Characteristics ( ANSI / TIA-568.2-D )
| DC Resistance | Max. 23.6?/100mat 20˚C for each conductor ( UL 444 ) |
| DC Resistance Unbalance | Max. 5% within a pair at 20˚C |
| DC Resistance Unbalance Pair-Pair | n/a |
| Dielectric Strength | 1KV d.c./0.7KV a.c. for 1min. or 2.5KV d.c./1.7KV a.c. for 2s ( IEC61156-5 ) |
| Insulation Resistance | 5000M?/km ( IEC61156-5 ) |
| Mutual Capacitance | 5.6nf/100m. 1kHz at 20˚C |
| Capacitance Unbalance pair-ground | Max. 330pF/100m. 1Khz at 20˚C |
| Transfer Impedance | n/a |
| Coupling Attenuation | n/a |
| Phase delay | Max. 536ns/100m at 500Mhz |
| Delay Skew | Max. 45ns/100m, from 1 to 500Mhz at 20˚C, 40˚C & 60˚C |
| Nominal Velocity Impedance | 69% at 100Mhz |
| Characteristic Impedance | 100± 5? at 100Mhz |
| PoE | 60Vd.c 4PPoE 60W. IEEE802.3bt Type-3 |
| UL Votage Rating | 300V ( UL 444 ) |
Transmission Characteristics
| Frequency Mhz | Return loss | Insertion loss | NEXT Min. db | PSNEXT Min. db | ACRF Min. db | PSACRF Min. db | TCL Min.db |
| 1 | 20 | 4.1 | 74.3 | 72.3 | 67.8 | 64.8 | 40 |
| 4 | 23 | 7.4 | 65.3 | 63.3 | 55.8 | 52.8 | 40 |
| 100 | 19 | 37.3 | 44.3 | 42.3 | 27.8 | 24.8 | 30 |
| 250 | 15.6 | 60.6 | 38.3 | 36.3 | 19.8 | 16.8 | 26 |
| 500 | 13 | 88.3 | 33.8 | 31.8 | 13.8 | 10.8 | 23 |
Cable Approvals:
Australian AS/CA: S008: 2020 ACMA test Lab approval ( RCM Mark )
ANSI/TIA568C.2
ISO/IEC11801 Class EA
EN 50288-4-2
IEC61156-6
Flame Retardant Standard:
UL444 CM
CMR
IEC60332-1
IEC60332-3 Part24
LSZH Standards:
IEC60754-2, IEC61034-1, IEC61034-2
Cable Parameter:

Cable Packing
Quality Zip bag with Fluke DSX-8000 Component test Label.