This is a 1CH remote control receiver designed for various working modes including Jog, Self-lock, Interlock, and Delay. It supports both fixed code and learning code remote control types.
Key features
- RF frequency of 433MHZ
- Remote control distance of 100 meter in open environment
- MCU Software decoding
- Multiple working modes: Jog Non Latched, inter lock Latched, self lock, Self Latched, and Delay off
- Fixed wiring terminal
- Output normally open, Common, and normally closed
Specifications
- Input Voltage: DC10 14V
- Standby Current: 5MA
- RF Frequency: 433MHZ
- RF Working mode: Super heterodyne receiver
- Receiver Sensitivity: 90dBm
- Remote Control Distance: 100 meter In open environment
- Decoding Way: MCU Software decoding
- Support remote control type: Fixed code learning code
- Channel: 1CH
- Working Voltage: DC12V
- Output Current: 10A
- Rated load: 10A 250VAC 10A 125VAC 10A 30VDC 10A 28VDC
- Dimension: 3 5cm 3cm 1 6cm
Working output way
- 1 Jog Non Latched: Press one button is Working ON Loosen your finger on the same button is Stop OFF One channel switch need one buttons remote control
- 2 Self lock Self Latched: Press one button for one time is working ON Press the same button again is stop OFF One channel switch need one buttons remote control
- 3 Inter lock Latched: Press one button is working ON press another button is stop OFF One channel switch need 2 buttons remote control
- 4 Delay: Press remote control relay pull in release the remote control and begin timekeeping after 5s 10s 15s will automatically close the relay