Antec Flux Pro TG Full Tower Case White

The Antec Flux Pro is a full tower case that comes with a tempered glass panel, mesh front and bottom panels for increased airflow, and 6 PWM fans for maximum cooling. 3 Antec Tranquil 140mm fans are mounted to the front, and 1 in the rear, along with 2 P12 reverse blade fans on top of the PSU shroud ensures that both the GPU and CPU will receive plenty of cooling. The Antec Flux Pro also features its unique iShift technology that allows for power supplies to mount perpendicular to the case to allow for ease of access to PSU cables. The Flux Pro also includes a built in ARGB and PWM controller that can be synced to the motherboard.

Features

---

Flux Pro White Full Tower Case

Flow Luxury

F-LUX Platform, abbreviation of Flow Luxury, features ultra case structure design for excellent airflow and 6 fans included, delivering enhanced GPU cooling performance.

Flux Airflow

Multi-directional vent design, featuring extensive air intakes at the bottom, power supply chamber and lower sides, along with top vents and large-area mesh at the front, creating a dedicated Antec Flux airflow channel.

Multi-Directional Vent Design

• Front panel & Lower right side (1.2mm fine mesh)
• Left side panel & Top of PSU chamber (1.2mm fine mesh)

Pre-Installed 6 x High-Performance PWM Fans

2X P12R PWM Reverse

• Fan Speed | 600±200~1500±200 RPM
• Airflow | 61.46 CFM
• Noise | 27.6 dB(A)

4X Tranquil 140

• Fan Speed | 450±100~1500±150 RPM
• Airflow | 85.96 CFM
• Noise | 27.5 dB(A)

With Built-In ARGB & PWM Fan Control Hub in Sync with M/B

Flux Vertical Cooling

Air intake via the PSU chamber maximises heat dissipation while enhancing the intake effect for the graphics card.

Flux Horizontal Cooling

Air intake via the front mesh provides smooth venting channel throughout the case.

Premium Wood

Front panel is crafted with a combination of metal mesh and wood (birch) to create a high-quality texture with different materials, integrating seamlessly into your home design.

Innovative iShift PSU 90° Mount

In addition to the standard PSU mount orientation, a 90-degree rotated option powered by the included extension cable is available. Plug in the cable connector from the right side, routing has never been easier.

• Support 180mm long PSU.
• Reorienting the power supply enlarges the air intake at the bottom.

PSU Installation

Left side of PSU chamber is detachable, making it easy to install the power supply.

PSU Side Mount Guide

Compatible with various power interface layouts:

• PSU Type A
• PSU Type B
• PSU Type C
• PSU Type D

CPU/GPU Dual Temperature Display

Intuitive hardware temperature display design with 4 different modes:

• GPU & CPU On
• GPU & CPU Off
• Only CPU On
• Only GPU On

*Antec iUnity software must be installed.

Antec Iunity

The Antec iUnity provides instant data on PC specs, loads, and usage.

Removable Top Cooling Bracket

Mount the fans/radiators on the cooling bracket first and install the cooling bracket back to the case.

Removable Cooling Bracket on Top of PSU Shroud

When fans (2 available) are installed on the case bottom, remove the top shroud bracket to maximise the airflow, fulfilling the optimal vertical cooling scheme.

Remove all three PSU shroud covers to install 3 x 120mm fans or a 360mm push-pull radiator.

Removable Front Cooling Bracket

1. Vertically adjustable to 5 positions to fit the huge top AIO.

2. Full cut-out design for enhanced air intake.

3. Can install fans or radiators.

• 360mm Regular Radiator & (Thickness: 27mm) Regular Fan (Thickness: 25mm)
• 420mm Regular Radiator & Regular Fan (Thickness: 27mm) (Thickness: 25mm)
• 420mm Thick Radiator (Thickness: 45mm) & Regular Fan (Thickness: 25mm)
• 420mm Thick Radiator (Thickness: 45mm) & Thick Fan (Thickness: 30mm)

Recommended Water Cooling Configuration

Fan & Radiator Support

Can only accommodate Top 420mm + Front 360mm radiator, or Front 420mm + Top 360mm radiator at the same time.

Support Vertical GPU Mount With Vertical Bracket

Fully-open PCI slot covers can be removed to install the graphics card vertically.

Tool-Free Panel Design

Optimal Cable Routing Experience

Cable Management

• Cable tie x 3 - For Fan & I/O Cables, For PSU & Accessory Cables
• Velcro strap x 3 - For CPU Power Cables

Modular Hard Drive Cage

• Hard drive cage can be detached from the bottom plate.
• Can be adjusted left and right at the case bottom.
• And can be removed to install fans.
• Flexible installation positions. (Same installation way as for the fan)
• Cage along with the bottom plate can be moved to 120mm fan positions.

I/O Panel

Dust plugs included.

Bottom Full-Size Pull-Out Dust Filter

For easy cleaning and strong dust prevention.

Extensive Interior

• Motherboard support E-ATX(≤285mm), ATX, Micro-ATX, ITX
• CPU cooler max height ≤ 190mm
• GPU max length ≤ 455mm
• Power Supply max length(Include cable) ≤ 180/300mm (with HDD), (Include cable) ≤ 470mm (without HDD), (Not Include cable) ≤ 180mm (side mount)
• 3.5" / 2.5" 4 / 4
• 2.5" 2