APC by Schneider Smart-UPS SRT 6000VA RM 230V

APC Smart-UPS SRT 6000VA RM 230V
High density, double-conversion on-line power protection with scalable runtime
Includes : CD with software , Installation guide , Rack Mounting brackets , Rack mounting hardware , Rack Mounting support rails , Temperature Probe , USB cable , Warranty card , Web/SNMP Management Card
10/100 BaseT ConnectionConnect the device to a network using a 10 or 100 BaseT connectionBattery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenanceGreen modePatent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.LCD graphics displayText and mimic diagrams that display modes of operation, system parameters and alarms.Rack/Tower convertibleProtects the initial investment in the UPS when migrating from tower to rack-mount environment.

Offical Product Link · Open Link

Output

• 6.0 KWatts / 6.0 kVA

• Max Configurable Power (Watts)

  6.0 KWatts / 6.0 kVA

• Nominal Output Voltage

  230V

• Output Voltage Distortion

  Less than 2%

• Output Frequency (sync to mains)

  50/60Hz +/- 3 Hz

• Other Output Voltages

  220, 240

• Load Crest Factor

  3 : 1

• Topology

  Double Conversion Online

• Waveform type

  Sine wave

• Output Connections

  (2) IEC Jumpers (Battery Backup)

  (4) IEC 320 C19 (Battery Backup)

  (1) Hard Wire 3-wire (H N + G) (Battery Backup)

  (6) IEC 320 C13 (Battery Backup)

• Bypass

  Internal Bypass (Automatic and Manual)

Input

• Nominal Input Voltage

  230V

• Input frequency

  40 - 70 Hz (auto sensing)

• Input Connections

  Hard Wire 3 wire (1PH+N+G)

• Input voltage range for main operations

  160 - 275V

• Input voltage adjustable range for mains operation

  100 - 275 (half load)V

• Other Input Voltages

  220, 240

Batteries & Runtime

• Battery type

  Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof

• Typical recharge time

  1.5hour(s)

• Replacement Battery

  APCRBC140

• Expected Battery Life (years)

  3 - 5

• RBC Quantity

  1

• Extendable Run Time

  1

• Battery Volt-Amp-Hour Capacity

  902

• Extended Run Options

  APC-Smart-UPS-SRT-6000VA-RM-230V

• Runtime

  View Runtime Graph

  View Runtime Chart

• Efficiency

  View Efficiency Graph

Communications & Management

• Interface Port(s)

  RJ-45 10/100 Base-T , RJ-45 Serial , Smart-Slot , USB

• Control panel

  Multi-function LCD status and control console

• Audible Alarm

  Audible and visible alarms prioritized by severity

• Emergency Power Off (EPO)

  Yes

• Available SmartSlot Interface Quantity

  1

Surge Protection and Filtering · Surge energy rating 480Joules

Physical

• Maximum Height

  174mm , 17.4cm

• Maximum Width

  432mm , 43.2cm

• Maximum Depth

  719mm , 71.94cm

• Rack Height

  4U

• Net Weight

  60.0kg

• Shipping weight

  67.0kg

• Shipping Height

  370mm , 37.0cm

• Shipping Width

  610mm , 61.0cm

• Shipping Depth

  960mm , 96.0cm

• Color

  Black

• Units per Pallet

  6.0

Environmental

• Operating Environment

  0 - 40 °C

• Operating Relative Humidity

  0 - 95% non-condensing %

• Operating Elevation

  0-3000meters

• Storage Temperature

  -15 - 45 °C

• Storage Relative Humidity

  0 - 95% non-condensing %

• Storage Elevation

  0-15000meters

• Audible noise at 1 meter from surface of unit

  55.0dBA

• Online thermal dissipation

  1300.0BTU/hr

• Protection Class

  IP 20

Conformance

• Approvals

  CE, CE Mark, EAC, EN/IEC 62040-1, EN/IEC 62040-2, ENERGY STAR (EU), IRAM, RCM, VDE

• Standard warranty

  3 years repair or replace (excluding battery) and 2 years for battery

Sustainable Offer Status

• RoHS

  Compliant

• REACH

  REACH: Contains No SVHCs

* Specifications are subject to change without notice.
* Specifications may vary.
* The product picture(s) is only for your reference, it may differ from the actual product.