Car TPMS with Low-Pressure External 2x Sensors 0~87 PSI

The Car TPMS Tyre Pressure Monitoring System provides real-time tyre pressure and temperature data to help improve safety, fuel efficiency, and tyre life. Designed for sedans, SUVs, and utes, it monitors up to four tyres using low-pressure external sensors for accurate, reliable readings. Easy to install and simple to use, it gives you clear alerts so you can drive with confidence.

PRODUCT FEATURES

Real-time Monitoring

Provides real-time pressure and temperature for each tyre, which prevents dangerous blowouts, improves fuel efficiency, extends tyre life through even wear. Monitor your tyre pressure accurately from 0 to 87 PSI and temperature data within 1.5 PSI or 3F accuracy.

Monitors up to 4 tyres

Monitors up to 4 tyres, designed for Sedan Cars, SUVs and Utes.

Low Pressure External Sensors (0-87 PSI)

It comes with Low Pressure External Sensors that accurately detects tyre pressures from 0 to 87 PSI, these are designed for typical passenger cars, SUVs, Utes, etc.

Easy Installation

The monitor plugs directly into the 12V auxiliary power outlet; there is no need for complex wiring or professional installation.

5 Alarms Modes for Enhanced Safety

• High-Pressure Alarm: Triggers if a tyre pressure exceeds a safe, pre-set threshold, which can be caused by heat build-up or overinflation.
• Low-Pressure Alarm: Alerts the driver when tyre pressure drops below a minimum safe level, which is a key safety feature to prevent underinflation, potential tyre damage, and accidents.
• High-Temperature Alarm: Warns if the internal temperature of a tyre exceeds a certain limit, often an indication of overwork, underinflation, or a mechanical issue.
• Fast Leakage Alarm: Provides an immediate warning in the event of a quick loss of air pressure, such as from a puncture.
• Sensor Low Battery Alarm: Indicates when a specific TPMS sensor's internal battery is running low, ensuring the system remains functional.

TPMS Sensor ID Learning Steps

• Step 1: In standby mode, press the ""SET"" button 5 times to enter learning ID mode.
• Step 2: Short-press the ""SET"" button to select the tyre location and install the sensor to the tyre valve.
• Step 3: The sensor will automatically send its own ID to the display, wait until you hear six beeps to confirm that the code is received.
• Step 4: After all sensors are programmed to the monitor, press and hold the ""SET"" button for 3 seconds to save the settings.

The middle button represents the tyre location; 0 is for the left front tyre (LF), 1 is for the right front tyre (RF), 2 is for the right rear tyre (RR), and 3 is for the left rear tyre (LR).

Colour Screen

Providing you with clear and easy-to-read tyre pressure and temperature data in any light condition.

Wide Sensor Compatibility

Designed to work with High-Pressure Flow-Thru TPMS Sensor (TPMS-HPE22), High-Pressure Anti-theft External TPMS Sensor (TPMS-HPSP3), Low-Pressure External TPMS Sensor (TPMS-LPSO)