Creative Sound Blaster X4 Hi-res 7.1 External USB DAC and AMP Sound Card (70SB181500000)

SPECIFICATIONS

Weight384g / 13.55 oz Dimensions130.5 mm x 130.5 mm x 40.6 mm (5.14 x 5.14 x 1.60 inches) Dynamic Range (DNR)114 dB Audio TechnologySound Blaster Acoustic Engine, Super X-FiMax. Playback QualitySampling Rate (Playback) : Direct Mode: Playback Resolution (Optical Out): PCM 16/24-bit / 48.0, 96.0, 192.0 kHz Dolby Digital Live: 16-bit, 48.0 kHz Playback Resolution (Stereo): PCM 16/24-bit / 48.0, 96.0, 192.0 kHz Surround 7.1: PCM 16/24-bit / 48.0, 96.0 kHz Max. Recording QualityMic-in: 16/24-bit / 48.0, 96.0 kHz, Line-in: 16/24-bit / 48.0, 96.0 kHz, Optical-in: 16/24-bit / 48.0, 96.0 kHz Recording ResolutionMic-in: 16 / 24-bit / 48.0, 96.0 kHz Line-in: 16 / 24-bit / 48.0, 96.0 kHz Optical In: 16 / 24-bit / 48.0, 96.0 kHz Connectivity Options (Main)1 x TOSLINK Optical Out, 1 x Rear Out, 1 x Centre / Sub Out, 1 x 1/8 Headphone / Headset Jack, 1 x 1/8 Ext. Mic-in Jack, 1 x Front-out, 1 x Side Out Jack, 1 x USB-C port for PC / Mac, 1 x Optical / Line-in Combo Jack Headphone AmpSupported Headphone Impedance: 32600, High Gain: 150600 (2.3V RMS @ 150, 2.9V RMS @ 600), Output Impedance: 10, Low Gain: 32149 (1.2V RMS @ 32) Audio TechnologiesCrystalVoice Scout Mode Supported Operating SystemsWindows 10 Ver 1703, macOS 10.15 and above, Windows 11 Included AccessoriesOptical Cable (1m / 3.28 ft), USB-A to USB-C Cable (2m / 6.56 ft) DACDynamic Range (Stereo): 114 dB, THD+N (Stereo): 0.001% ADCDynamic Range: 104 dB, THD+N: 0.0017%PowerUSB Bus Powered, USB-C Recommended UsageHome Entertainment System RequirementsWindows OS Intel Corei3 or AMD equivalent processor Intel, AMD, or 100% compatible motherboard Microsoft Windows 11, Windows 10 32 / 64-bit Ver 1703 or higher > 4 GB RAM > 4 GB of free hard disk space USB 2.0 / USB 3.0 port macOS macOS X 10.15 or higher > 4 GB RAM USB 2.0 / USB 3.0 port PS5 Firmware Version 20.02-2.26.00.00-00.00.00.0.1 or later Available USB port Audio Balance feature requires a HDMI to Optical converter (not included) PS4 Firmware Version 5.0 or later Available USB port Available Optical-out port (for Audio Balance) Nintendo Switch Switch OS 5.0 or later Available 3.5 mm headphone port Available USB port (in docking mode) External USB Power (not included) Voice communication is title-dependent Android^ Android OS Version 8.0 or later Device must have built-in Bluetooth Low Energy (BLE) support iOS^ iOS Version 12.0 or later Device must have built-in Bluetooth Low Energy (BLE) support ^Used as a remote controller for Sound Blaster X4 on PS5 / PS4 / Nintendo Switch only, does not support Bluetooth audio streaming Package ContentsSound Blaster X4 USB-A to USB-C Cable (2m / 6.56 ft) Optical Cable (1m / 3.28 ft) SmartComms Kit Leaflet Quick Start Guide and Leaflets Warranty Leaflets