EK Quantum Kinetic TBE 200 D5 D-RGB Reservoir Pump Combo Acetal

The EK Quantum Kinetic TBE 200 D5 PWM D-RGB Acetal is a high performance cylindrical pump and reservoir combo designed for custom PC liquid cooling loops, combining a genuine D5 pump with a 205mL reservoir and integrated addressable D-RGB lighting. Featuring six G1/4 inch ports across the top and bottom sections, the unit provides flexible options for filling, draining and tube routing, while a pre-installed internal tube helps reduce coolant splashing, air intake and foaming when used as an inlet. The 60mm diameter acrylic reservoir tube is paired with a CNC-machined black POM acetal pump top and reservoir base, with EPDM O-ring sealing for dependable operation. The integrated D5 pump delivers up to 1500L/h flow and a maximum pressure head of 3.9m, with PWM control from approximately 20-100 percent and SATA power plus a 4-pin PWM connection for convenient system integration. A rubber shock absorber decouples the pump from its mounting clip to minimise vibration-induced noise, while the mounting system supports horizontal or vertical positioning for flexible installation and tube routing. Addressable D-RGB lighting is compatible with popular motherboard RGB synchronisation technologies, and the compact 200mm overall height and 65 x 34mm mounting hole pattern make the EK Quantum Kinetic TBE 200 a versatile solution for performance focused custom liquid cooling builds.

Features

---

EK-Quantum Kinetic TBE 200 D5 PWM D-RGB - Acetal

EK-Quantum Kinetic TBE D5 combo unit is the revolution of the most popular pump-reservoir assembly design on the market. The new Kinetic combo units are part of the EK Quantum Line of products and come with sophisticated addressable D-RGB lighting implementation and a genuine D5 pump! The reservoir is equipped with a total of six G1/4“ ports so that users can choose the most optimal setup for their liquid cooling loops.

The top features three G1/4" ports, one of which has a pre-installed nickel-plated brass internal tube which helps to prevent the splashing of the coolant inside the reservoir if the top is to be used as an inlet. This reduces the chances of air being sucked in by the pump and foaming of the coolant as well. Any of these ports can also use used for filling the system or adding additional accessories (thermal probes, LEDs, etc.)

Another three industry-standard G1/4" ports are available in the bottom combo housing. The upgrade compared to the previous combo unit is the 3rd available side port usable as either an optional inlet or a drain port.

A special rubber shock absorber is used to de-couple the main pump body from the mounting clip for silent operation, free of vibration-induced noise. Additionally, horizontal and vertical positioning is supported for easier tube routing possibilities.

The 60mm diameter tube is made of high-quality acrylic material, while the reservoir bottom/pump top is CNC machined black POM acetal. The sealing is performed by a quality EPDM O-ring.

The integrated addressable D-RGB is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin LED connector is to be aligned with the +5V marking on the D-RGB header.

This reservoir can be easily upgraded with longer acrylic tubes used by EK-RES X3 series reservoirs.

Please Note

• EK-D5 PWM G2 is an enhanced variant of the world-renowned Xylem D5 with improved power management control, which allows for better speed control through motherboard BIOS or dedicated fan controller.
• The D5 pump is water lubricated and it must not be run dry; otherwise, permanent bearing damage can occur.
• This product should NOT be installed with any aluminium Fluid Gaming parts.