EK Quantum Kinetic TBE 200 D5 D-RGB Reservoir Pump Combo Plexi

The EK-Quantum Kinetic TBE 200 D5 D-RGB Reservoir Pump Combo Plexi is a compact cylindrical pump and reservoir combination designed for custom PC liquid cooling systems, integrating a genuine D5 pump with a 205mL reservoir and addressable D-RGB lighting for a clean, coordinated build aesthetic. The clear Plexi reservoir tube provides excellent coolant visibility, while the pump top and reservoir base incorporate multiple G1/4" ports for flexible loop configuration and convenient filling, draining and tubing options. The powerful D5 pump delivers up to 1500L/h flow rate and a maximum pressure head of 3.9m, with PWM control allowing pump speed to be adjusted according to system requirements. A dedicated anti-vortex insert helps prevent air from being drawn into the pump, while the internal tube design helps reduce coolant splashing and foaming. The integrated D-RGB lighting can be synchronised with compatible motherboard lighting systems, and the included mounting solution supports flexible installation for a practical and visually striking custom liquid cooling loop.

Features

---

EK-Quantum Kinetic TBE 200 D5 PWM D-RGB - Plexi

EK-Quantum Kinetic TBE D5 combo unit is the revolution of the most popular pump-reservoir assembly design on the market. The new Kinetic combo units are part of the EK Quantum Line of products and come with sophisticated addressable D-RGB lighting implementation and a genuine D5 pump! The reservoir is equipped with a total of six G1/4“ ports so that users can choose the most optimal setup for their liquid cooling loops.

The top features three G1/4" ports, one of which has a pre-installed nickel-plated brass internal tube which helps to prevent the splashing of the coolant inside the reservoir if the top is to be used as an inlet. This reduces the chances of air being sucked in by the pump and foaming of the coolant as well. Any of these ports can also use used for filling the system or adding additional accessories (thermal probes, LEDs, etc.)

Another three industry-standard G1/4" ports are available in the bottom combo housing. The upgrade compared to the previous combo unit is the 3rd available side port usable as either an optional inlet or a drain port.

A special rubber shock absorber is used to de-couple the main pump body from the mounting clip for silent operation, free of vibration-induced noise. Additionally, horizontal and vertical positioning is supported for easier tube routing possibilities.

The 60mm diameter tube is made of high-quality acrylic material just like the reservoir bottom and top while the sealing is performed by a quality EPDM O-ring. Proper LED implementation is one of the main focus points of EK so that there are as few visible "LED hotspots" as possible.

The integrated addressable D-RGB is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin LED connector is to be aligned with the +5V marking on the D-RGB header.

This reservoir can be easily upgraded with longer acrylic tubes used by EK-RES X3 series reservoirs.

Please Note

• EK-D5 G3 PWM is an enhanced variant of the world-renowned Xylem D5 with improved power management control, which allows for better speed control through motherboard BIOS or dedicated fan controller.
• The D5 pump is water lubricated and it must not be run dry; otherwise, permanent bearing damage can occur.
• This product should NOT be installed with any aluminium Fluid Gaming parts!