This is a remote control receiver designed for various automation tasks. It supports multiple working modes including Jog, Non Latched, Interlock, Latched, Self Lock, Self Latched, and Delay off.
Key features
- RF frequency of 433MHZ
- Remote control distance of 100 meter in open environment
- Supports fixed code and learning code types
- MCU software decoding
- Multiple working modes
- Fixed wiring terminal
Specifications
- Input Voltage: DC10 14V
- Standby Current: 5MA
- RF Frequency: 433MHZ
- RF Working mode: Super heterodyne receiver
- Receiver Sensitivity: 90dBm
- Remote Control Distance: 100 meter In open environment
- Decoding Way: MCU Software decoding
- Support remote control type: Fixed code learning code
- Channel: 1CH
- Multiple working modes: Jog Non Latched inter lock Latched self lock Self Latched Delay off
- Wiring Method: Fixed wiring terminal
- Working Voltage: DC12V
- Output Current: 10A
- Rated load: 10A 250VAC 10A 125VAC 10A 30VDC 10A 28VDC
- Output Normally open Common Normally closed
- Dimension: 3 5cm 3cm 1 6cm
Working output way
- 1 Jog: Press the learning button then release set the mode from the system automatically working mode to action mode wait for a while when the board LED off said it is into the learning state press the remote control the system received the signal The LED flashes 5 times and goes off again After 3S delay LED light marked learning success the system automatically withdraw from the learning state
- 2 Self locking: Press the learning button then release press 2 times the system automatically set to self locking mode wait for a while LED off it is into the learning state press the remote control LED flash 5 times Off 3S after the delay LED light learning success
- 3 Interlock: press the learning button then release press 3…