Gigabyte WRX90 AI TOP AMD sTR5 E-ATX Motherboard (WRX90 AI TOP)

SPECIFICATIONS:CPUAMD Socket sTR5, support for AMD Ryzen Threadripper PRO 9000-WX processors / AMD Ryzen Threadripper PRO 7000-WX processors (Go to GIGABYTE's website for the latest CPU support list.)ChipsetAMD WRX90 MemorySupport for DDR5 ECC Registered memory modules (RDIMM/RDIMM-3DS)8 x DDR5 DIMM sockets supporting up to 2 TB of system memory- AMD Ryzen Threadripper PRO 9000-WX/PRO 7000-WX Series Processors support 8-Channel memory architecture- AMD Ryzen Threadripper 9000/7000 Series Processors support Quad Channel memory architectureSupport for AMD EXtended Profiles for Overclocking (AMD EXPO) and Extreme Memory Profile (XMP) memory modules(The CPU and memory configuration may affect the supported memory types, data rate (speed), and number of DRAM modules, please refer to "Memory Support List" on GIGABYTE's website for more information.) Onboard Graphics1 x AST2600 D-Sub port2 x USB4 USB Type-C ports, supporting Type-C and DisplayPort video outputs and a maximum resolution of 3840x2160@240 Hz* Supports DisplayPort 1.4 and HDR.** Graphics output specifications depend on the installed graphics card. AudioRealtek ALC1220 CODEC* The back panel Line Out jack supports DSD audio output.High Definition Audio2/4/5.1/7.1-channel* Audio jack functionality and 7.1-channel configuration can be customized in the audio software.Support for S/PDIF Out LANIntel X710 Dual 10GbE network controller (10 Gbps/5 Gbps/2.5 Gbps/1 Gbps/100 Mbps)Integrated AST2600 BMC and Realtek 1GbE network controller (1 Gbps/100 Mbps) BMC1 x microSD card slot (IO_SD_CR1)1 x PMBus connector (PM_BUS)2 x LAN LED headers (LAN1_LED/LAN2_LED)1 x MSG LED header (MSG_LED)1 X MSG LED (MSG_LED1)2 x BMC status LEDs (BMC_LED1/BMC_LED3)1 x IPMB header (BMC_IPMB)1 x Chassis intrusion header (BMC CSO)1 x I2C_12 header (I2C_12)1 x Location LED header (LOCATION)1 x Location LED (LOC_LED)1 x VGA switch (VGA_SW)1 x BMC switch (BMC_SW)1 x BMC LAN switch (BMC_LAN_SW)1 x PSU switch (S_PSU_SW)1 x IPMI switche (IPMI_SW) Expansion Slots6 x PCI Express x16 slots, integrated in the CPU, supporting PCIe 5.0 and running at x16 (PCIEX16_1/PCIEX16_2/PCIEX16_3/PCIEX16_4/PCIEX16_5/PCIEX16_7)* The PCIe x16 slots support only graphics cards or NVMe SSDs. For single-card configurations, install the graphics card in the PCIEX16_1 slot.1 x PCI Express x16 slot, integrated in the CPU, supporting PCIe 5.0 and running at x8 (PCIEX8)1 x M.2 Socket 1 connector for the wireless communication module (M2_WIFI) Storage Interface1 x MCIO 8i connector (MCIOX8_1), integrated in the CPU, supporting PCIe 5.0 x4/x2 SSDs* The MCIOX8_1 connector shares bandwidth with M2A_CPU and M2B_CPU. Occupying either M.2 slot disables the MCIOX8_1 connector.1 x MCIO 8i connector (MCIOX8_2), integrated in the CPU, supporting SATA and PCIe 5.0 x4/x2 SSDs* This connector defaults to PCIe mode. To enable other options, please navigate to the ""BIOS Setup"" page of GIGABYTE's website.2 x M.2 connectors (M2A_CPU/M2B_CPU), integrated in the CPU, supporting Socket 3, M key, type 2280 PCIe 5.0 x4/x2 SSDs1 x M.2 connector (M2C_SB), integrated in the Chipset, supporting Socket 3, M key, type 2280 PCIe 4.0 x4/x2 SSDs4 x SATA 6Gb/s connectorsRAID 0, RAID 1, RAID 5, and RAID 10 support for NVMe SSD storage devicesRAID 0, RAID 1, RAID 5, and RAID 10 support for SATA storage devicesUSBCPU:4 x USB 3.2 Gen 2 Type-A ports (red) on the back panelCPU+ASMedia USB4 controller:2 x USB4 USB Type-C ports on the back panelChipset:1 x USB Type-C port with USB 3.2 Gen 2x2 support (internal)2 x USB 3.2 Gen 2 Type-A ports (red) on back panel2 x USB 3.2 Gen 1 ports (internal)Chipset+USB 2.0 Hub:4 x USB 2.0/1.1 ports (internal) Internal I/O Connectors1 x 24-pin ATX main power connector2 x 8-pin ATX 12V power connectors4 x PCIe power connectors1 x CPU fan header1 x CPU fan/water cooling pump header2 x system fan headers3 x system fan/water cooling pump headers1 x addressable RGB Gen2 LED strip header1 x RGB LED strip header2 x MCIO 8i connectors3 x M.2 Socket 3 connectors1 x M.2 Socket 1 connector4 x SATA 6Gb/s connectors1 x USB Type-C header (USB 3.2 Gen 2x2)1 x USB 3.2 Gen 1 header2 x USB 2.0/1.1 headers1 x front panel header1 x front panel audio header1 x TPM header (GC-TPM2.0 SPI V2),1 x serial port header2 x temperature sensor headers1 x reset jumper1 x Clear CMOS jumper Back Panel Connectors1 x Reset button1 x Power button1 x Clear CMOS button1 x Q-Flash Plus button2 x USB4 USB Type-C ports (DisplayPort)2 x Mini-DisplayPort In ports1 x Server management LAN port6 x USB 3.2 Gen 2 Type-A ports (red)1 x D-Sub port2 x RJ-45 ports2 x audio jacks1 x optical S/PDIF Out connector I/O ControlleriTE I/O Controller Chip H/W MonitoringVoltage detectionTemperature detectionFan speed detectionWater cooling flow rate detectionFan fail warningFan speed control Fan or pump speed control depends on the installed fan or pump model. BIOS1 x 256 Mbit flashLicensed AMI UEFI BIOSPnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 Unique FeaturesSupport for GIGABYTE Control Center (GCC)Support for Q-FlashSupport for Q-Flash PlusSupport for native BMC software functionalitySupport for AI TOP Utility (Ubuntu) Bundled SoftwareNorton Internet Security (OEM version) Operating SystemSupport for Ubuntu 24.04 LTSSupport for Windows 11 64-bit Form FactorE-ATX; 30.5cm x 33.0cm