Gigabyte Z890 AI TOP LGA 1851 E-ATX Motherboard (Z890 AI TOP)

SPECIFICATIONS:CPULGA1851 socket: Support for Intel Core Ultra ProcessorsL3 cache varies with CPU* Please refer to "CPU Support List" for more information. ChipsetIntel Z890 Express Chipset MemorySupport for DDR5 9500(O.C)/ 9466(O.C) / 9333(O.C) / 9200(O.C)/ 9066(O.C) / 8933(O.C) /8800(O.C) /8600(O.C) / 8400(O.C) /8266(O.C) / 8200(O.C) / 8000(O.C) / 7950(O.C) / 7900(O.C) / 7800(O.C) / 7600(O.C.) / 7400(O.C.) / 7200(O.C.) / 7000(O.C.) / 6800(O.C.) / 6600(O.C.) / 6400 / 6200 / 6000 / 5800 / 5600MT/s memory modules.4 x DDR5 DIMM sockets supporting up to 256 GB (64 GB single DIMM capacity) of system memoryDual channel memory architectureSupport for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modulesSupport for Extreme Memory Profile (XMP) memory modulesSupport CUDIMM memory module(The CPU and memory configuration may affect the supported memory types, data rate (speed), and number of DRAM modules, please refer to "Memory Support List" for more information.) Onboard GraphicsIntegrated Graphics Processor+Intel Thunderbolt 5 Controller:- 2 x Intel Thunderbolt 5 connectors (USB4 USB Type-C ports), supporting DisplayPort and Thunderbolt video outputs and a maximum resolution of 7680x4320@60 Hz (single display output) Because of the limited I/O resources of the PC architecture, the number of Thunderbolt devices that can be used is dependent on the number of the PCI Express devices being installed. (Refer to Chapter 2-6, "Back Panel Connectors," for more information.)* Support for DisplayPort 2.1 version and HDCP 2.3 Integrated Graphics Processor-Intel HD Graphics support:- 1 x Front Intel Thunderbolt 4 connector (USB4 USB Type-C port), supporting DisplayPort and Thunderbolt video outputsWhen a Thunderbolt monitor is installed, the maximum resolution supported is 5120x2880@60 Hz with 24 bpp (single display output).When a USB4 USB Type-C monitor is installed, the maximum resolution supported is 3840x2160@240 Hz (single display output). Support for DisplayPort 2.1 version and HDCP 2.3 - 1 x HDMI port, supporting a maximum resolution of 4096x2160@60 Hz Support for HDMI 2.1 version and HDCP 2.3. (Graphics specifications may vary depending on CPU or graphics card support.)Support for up to triple-display at the same time AudioESS ES9260 CODEC (rear panel audio)- High Definition Audio- 2-channelRealtek ALC897 CODEC (front panel audio) LAN2 x Marvell AQtion AQC113C 10GbE LAN chips(10 Gbps/5 Gbps/2.5 Gbps/1 Gbps/100 Mbps) Wireless Communication moduleIntel Wi-Fi 7 BE200- 802.11a, b, g, n, ac, ax, be, supporting 2.4/5/6 GHz carrier frequency bands- BLUETOOTH 5.4- Support for 11be 320MHz wireless standard(Actual data rate may vary depending on environment and equipment.) Wi-Fi 7 features require Windows 11 SV3 to function properly. (There is no support driver for Windows 10.)** Wi-Fi 7 channels on 6 GHz band availability depends on individual country's regulations. Expansion SlotsCPU:- 1 x PCI Express x16 slot, supporting PCIe 5.0 and running at x16 (PCIEX16)- 1 x PCI Express x16 slot, supporting PCIe 5.0 and running at x8 (PCIEX8) The PCIEX8 slot shares bandwidth with the PCIEX16 slot. When the PCIEX8 slot is populated, the PCIEX16 slot operates at up to x8 mode.* The PCIEX16 and PCIEX8 slots can only support a graphics card or an NVMe SSD.If only one graphics card is to be installed, be sure to install it in the PCIEX16 slot. Chipset:- 1 x PCI Express x16 slot, supporting PCIe 4.0 and running at x4 (PCIEX4) The PCIEX4 slot shares bandwidth with the M2L_SB connector. The PCIEX4 slot becomes unavailable when a device is installed in the M2L_SB connector. Storage InterfaceCPU:- 1 x M.2 connector (Socket 3, M key, type 25110/22110/2580/2280 PCIe 5.0 x4/x2 SSD support) (M2A_CPU)- 1 x M.2 connector (Socket 3, M key, type 25110/22110/2580/2280 PCIe 4.0 x4/x2 SSD support) (M2B_CPU)Chipset:- 2 x M.2 connectors (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2P_SB, M2L_SB)- 4 x SATA 6Gb/s connectors (SATA3 47)Chipset+ASMedia ASM1164 chip:- 4 x SATA 6Gb/s connectors (SATA3 03)RAID 0, RAID 1, RAID 5, and RAID 10 support for NVMe SSD storage devicesRAID 0, RAID 1, RAID 5, and RAID 10 support for SATA storage devices USBChipset+Intel Thunderbolt 5 Controller:- 2 x Intel Thunderbolt 5 (USB Type-C) ports on the back panelSupport up to 80Gbps with Thunderbolt devicesSupport up to 40Gbps with USB4 devices*Support up to 20Gbps with USB 3.2 devices CPU:- 1 x USB4 USB Type-C port onboard- 1 x USB Type-C port with USB 3.2 Gen 2x2 support, available through the internal USB header Chipset:- 1 x USB Type-C port with USB 3.2 Gen 2x2 support, available through the internal USB header- 2 x USB 3.2 Gen 2 Type-A ports (red) on the back panel- 2 x USB 3.2 Gen 1 ports on the back panel Chipset+USB 3.2 Gen 2 Hub:- 4 x USB 3.2 Gen 2 Type-A ports (red) on the back panel Chipset+USB 3.2 Gen 1 Hub:- 4 x USB 3.2 Gen 1 ports available through the internal USB headers Chipset+USB 2.0 Hub:- 4 x USB 2.0/1.1 ports available through the internal USB headers Internal I/O Connectors1 x 24-pin ATX main power connector2 x 8-pin ATX 12V power connectors1 x CPU fan header1 x CPU fan/water cooling pump header4 x system fan headers2 x system fan/water cooling pump headers3 x addressable RGB Gen2 LED strip headers1 x RGB LED strip header4 x M.2 Socket 3 connectors8 x SATA 6Gb/s connectors1 x front panel header1 x front panel audio header1 x Intel Thunderbolt 4 connector (USB4 USB Type-C port)2 x USB Type-C headers, with USB 3.2 Gen 2x2 support2 x USB 3.2 Gen 1 headers2 x USB 2.0/1.1 headers1 x Trusted Platform Module header (For the GC-TPM2.0 SPI V2 module only)1 x power button1 x reset button1 x Q-Flash Plus button1 x reset jumper1 x Clear CMOS jumper2 x temperature sensor headers1 x noise detection header Back Panel Connectors1 x DisplayPort In port1 x HDMI port (Note)2 x audio jacks2 x Intel Thunderbolt 5 connectors (USB Type-C ports)2 x USB 3.2 Gen 1 ports6 x USB 3.2 Gen 2 Type-A ports (red)2 x antenna connectors (2T2R)2 x RJ-45 ports (Note) Actual support may vary by CPU. I/O ControlleriTE I/O Controller Chip H/W MonitoringVoltage detectionTemperature detectionFan speed detectionWater cooling flow rate detectionFan fail warningFan speed control Whether the fan (pump) speed control function is supported will depend on the fan (pump) you install. Noise detection BIOS1 x 256 Mbit flashUse of licensed AMI UEFI BIOSPnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 Unique FeaturesSupport for GIGABYTE Control Center (GCC) Available applications in GCC may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications. Support for Q-FlashSupport for Q-Flash PlusSupport for Smart Backup Bundled SoftwareNorton Internet Security (OEM version)LAN bandwidth management software Operating SystemSupport for Windows 11 64-bit(Go to GIGABYTE's website for operating system support information.) Form FactorE-ATX Form Factor; 30.5cm x 28.5cm