Gigabyte Z890M Force Duo X WiFi7 LGA 1851 Micro ATX Motherboard (Z890M FORCE DUO X WIFI7)

SPECIFICATIONS:CPULGA1851 socket: Support for Intel Core Ultra Processors(Go to GIGABYTE's website for the latest CPU support list.)L3 cache varies with CPU ChipsetIntel Z890 Express Chipset MemorySupport up to 9733+MT/s (OC)CQDIMM Support up to 8000 MT/s (OC)2 x DDR5 CQDIMM sockets supporting up to 256 GB (64 GB/128 GB single DIMM capacity) of system memoryDual channel memory architectureSupport for ECC Quad Rank Un-buffered DIMM memory modules (operate in non-ECC mode)Support for non-ECC Quad Rank Un-buffered DIMM memory modulesSupport for Extreme Memory Profile (XMP) memory modules(The CPU and memory configuration may affect the supported memory types, data rate (speed), and number of DRAM modules, please refer to "Memory Support List" on GIGABYTE's website for more information.) Onboard GraphicsIntegrated Graphics Processor-Intel HD Graphics support:- 1 x USB4 USB Type-C port, supporting USB4 and DisplayPort video outputs and a maximum resolution of 4096x2304@144 Hz Support for DisplayPort 2.1 version and HDCP 2.3. - 1 x DisplayPort, supporting a maximum resolution of 4096x2304@60 Hz Support for DisplayPort 2.1 version and HDCP 2.3. (Graphics specifications may vary depending on CPU support.) AudioRealtek Audio CODECHigh Definition Audio 2/4/5.1/7.1-channel You can change the functionality of an audio jack using the audio software. To configure 7.1-channel audio, access the audio software for audio settings. Support for S/PDIF Out LANRealtek 5GbE LAN chip (5 Gbps/2.5 Gbps/1 Gbps/100 Mbps) Wireless Communication moduleRealtek Wi-Fi 7 RTL8922AE (PCB rev. 1.0)- 802.11a, b, g, n, ac, ax, be, supporting 2.4/5/6 GHz carrier frequency bands- BLUETOOTH 5.4- Support for 11be 160MHz wireless standardMediaTek Wi-Fi 7 MT7925 (PCB rev. 1.1)- 802.11a, b, g, n, ac, ax, be, supporting 2.4/5/6 GHz carrier frequency bands- BLUETOOTH 5.4- Support for 11be 160MHz wireless standard(Actual data rate may vary depending on environment and equipment.) Wi-Fi 7 features require Windows 11 SV3 to function properly. (There is no support driver for Windows 10.)** Wi-Fi 7 channels on 6 GHz band availability depends on individual country's regulations.*** Bluetooth version may change with updates. See the Wi-Fi chip vendors website for details. Expansion SlotsCPU:- 1 x PCI Express x16 slot, supporting PCIe 5.0 and running at x16 (PCIEX16) The PCIEX16 slot can only support a graphics card or an NVMe SSD. If only one graphics card is to be installed, be sure to install it in the PCIEX16 slot. Chipset:- 1 x PCI Express x16 slot, supporting PCIe 4.0 and running at x4 (PCIEX4) Storage InterfaceCPU:- 1 x M.2 connector (Socket 3, M key, type 2580/2280 PCIe 5.0 x4/x2 SSD support) (M2A_CPU)- 1 x M.2 connector (Socket 3, M key, type 2280 PCIe 4.0 x4/x2 SSD support) (M2B_CPU)Chipset:- 2 x M.2 connectors (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2P_SB, M2Q_SB)- 1 x M.2 connector (Socket 3, M key, type 2280 PCIe 4.0 x4/x2 SSD support) (M2M_SB)- 4 x SATA 6Gb/s connectorsRAID 0, RAID 1, RAID 5, and RAID 10 support for NVMe SSD storage devicesRAID 0, RAID 1, RAID 5, and RAID 10 support for SATA storage devices USBCPU:- 1 x USB4 USB Type-C port on the back panelChipset:- 1 x USB Type-C port with USB 3.2 Gen 2 support, available through the internal USB header- 1 x USB 3.2 Gen 2 Type-A port (red) on the back panel- 6 x USB 3.2 Gen 1 ports (4 ports on the back panel, 2 ports available through the internal USB header)Chipset+2 USB 2.0 Hubs:- 8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers) Internal I/O Connectors1 x 24-pin ATX main power connector2 x 8-pin ATX 12V power connectors1 x CPU fan header1 x CPU fan/water cooling pump header3 x system fan headers1 x system fan/water cooling pump header3 x addressable RGB Gen2 LED strip headers1 x RGB LED strip header5 x M.2 Socket 3 connectors4 x SATA 6Gb/s connectors1 x front panel header1 x front panel audio header1 x USB Type-C header, with USB 3.2 Gen 2 support1 x USB 3.2 Gen 1 header2 x USB 2.0/1.1 headers2 x Thunderbolt add-in card connectors (For GIGABYTE Thunderbolt 5 add-in card only)1 x Trusted Platform Module header (For the GC-TPM2.0 SPI V2 module only)1 x reset jumper Back Panel Connectors1 x reset button1 x power button1 x Clear CMOS button1 x Q-Flash Plus button4 x USB 3.2 Gen 1 ports1 x DisplayPort1 x USB4 USB Type-C port (DisplayPort)4 x USB 2.0/1.1 ports1 x RJ-45 port1 x USB 3.2 Gen 2 Type-A port (red)2 x antenna connectors (2T2R)2 x audio jacks1 x optical S/PDIF Out connector * Actual support may vary by CPU. I/O ControlleriTE I/O Controller Chip H/W MonitoringVoltage detectionTemperature detectionFan speed detectionWater cooling flow rate detectionFan fail warningFan speed control Whether the fan (pump) speed control function is supported will depend on the fan(pump) you install. BIOS1 x 512 Mbit flashUse of licensed AMI UEFI BIOSPnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 Unique FeaturesSupport for GIGABYTE Control Center (GCC) Available applications in GCC may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications. Support for Q-FlashSupport for Q-Flash PlusSupport for Smart Backup Bundled SoftwareNorton Internet Security (OEM version)Operating SystemSupport for Windows 11 64-bit Form FactorMicro ATX Form Factor; 24.4cm x 24.4cm