The HamGeek BS 188 is a radio transceiver designed for various operating modes including SSB, CW, AM, and FM. It features a nominal transmit power of 10W, reaching 15W at 13.8V.
Key features
- Supports SSB, J3E, CW, A1A, AM, A3E, FM, and DIG operating modes
- Software balanced modulation for SSB
- Software low level modulation for AM
- Minimum frequency step of 1Hz
- LCD brightness adjustment to reduce power consumption
- Spurious suppression ≥40dBc
- Carrier suppression ≥45dBc
Specifications
- Product Model: HamGeek BS 188
- Hardware Version: MCHF V0 6 3
- Receive Frequency Range: 1 6MHz 30MHz
- Receive Frequency Range Nominal: 3 5MHz 30MHz
- Maximum Continuous Coverage: 1 8MHz 32MHz
- Transmit Frequency Bands: 3 5MHz 3 9MHz 5351 5kHz 5366 5kHz 7MHz 7 3MHz 10 1MHz 10 150MHz 14MHz 14 350MHz 18 068MHz 18 168MHz 21MHz 21 450MHz 24 890MHz 24 990MHz 28MHz 29 700MHz
- Antenna Impedance: 50 ohms
- Operating Temperature Range: 10°C to 60°C
- Frequency Stability: ±1 5ppm after 5 minutes warm up 10°C to 60°C standard ±0 5ppm after 5 minutes warm up 10°C to 60°C TCXO M type
- Operating Voltage: 9 15V DC
- Receive Current: 410mA 440mA at maximum screen brightness
- Power Off Current: About 60mA 3 5mA after power amplifier driver stage improvement
- Transmit Current: 3A at full power 1 5A at 5W
- Transmit Power: Nominal 10W 15W at 13 8V full power
- Modulation Method: SSB software balanced modulation AM software low level modulation
- Spurious Suppression: ≥40dBc
- Carrier Suppression: ≥45dBc
- Selectivity: SSB 2 3kHz 6dB CW 500Hz 6dB
- IF Filter Bandwidth: 50Hz 3600Hz in 50Hz or 100Hz steps under SSB CW
- Dynamic Range: Better than 95dB
- RIT Range: ±1kHz
- Audio Output: 0 5W at 8Ω
- Receive Sensitivity: 0 11μV 0 89μV RFC 50 20 better than 108dBm 0 89μ