HAMGEEK USDX-FT8 / USDX-CW 5W usDX SDR QRP Transceiver QCX-SSB to SSB 15m/20m/40m 3-Band All Mode HF Transceiver With BT

1111MicrosoftInternetExplorer402DocumentNotSpecified7 8 磅Normal0Specifications Working voltage DC 13 8V 2A Note it is easy to burn out the radio if the voltage is too high DC power plug specifications 5 5 2 1 Attention Positive inside and negative outside Reverse connection is not allowed Operating frequency band 40m 20m and 15m bandsReceiver sensitivity ≥ 100dbmTransmit power 5WAudio output power 2WHeadphone jack WithMorse key jack With Plug specification is 3 5mm It supports manual and automatic CW keys set by yourselves in the menu Manual CW key is supported by default Antenna interface type BNC Advantages With Bluetooth Not less than 5W in 15m 20m and 40m bands With a firmware upgrade interface Through this interface you can update the firmware for HAMGEEK USDX CW or HAMGEEK USDX FT8 transceiver With an aluminum alloy housing Later the firmware of CW and FT8 versions can be flashed for each other Attention Menu 8 6 is the CAT data switch Please turn it off when FT8 is not used The FT8 version is added with Bluetooth function If you want to use the Bluetooth you must ensure that menu 8 6 CAT data switch is turned on The physical Bluetooth switch on the radio only controls the power supply of the Bluetooth About Bluetooth The CW and FT8 versions support Bluetooth CW version Turn off the Bluetooth function if you do not want to use it FT8 version Menu 8 6 CAT data switch should be turned on At the same time the radio in Bluetoo