iCarsoft OP V3.0 Professional Diagnostic Scan Tool for Opel & Vauxhall - Elite Electronics

V3.0 for OPEL Diagnostic with Auto VIN/Quick Test

• Diagnose Single Brand of most Models (OBDII-16DLC)
• Steering Angle Sensor (SAS) Calibration
• Full System Diagnosis
• ABS Bleeding(BLD)
• Auto Identify Technology
• lnjector Coding (INJ)(Some vehicles do not enjoy this function)
• Actuation Test / Bi-directory Test
• Read &Clear DTC
• Supports Freeze Frame of Fault Code functions
• Read Live Data
• Support Oil Service Reset
• Supports Battery Test
• Electronic Parking Brake (EPB) system maintenance
• Supports Data Review and Print
• Battery Management System (BMS)
• Full Speed Upgrade via Computer
• Diesel Particulate Filter (DPF) Regeneration Control System
• 4.0" TFT LCD, 480*320 Pixels
• Supports Multi-Language
• Electronic Throttle Control System (ETC)

Functions:

• Read Codes
• Erase Codes
• I/M Readiness - I/M Readiness indicate whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing
• DataStream
• Freeze Frame - When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer, this information is referred to as freeze frame data, freeze Data is a snapshot of the operating conditions at the time of an emission-related fault
• O2 Sensor Test - This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle's on-board computer
• On-Board Monitoring - This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems
• Evap System Test - The EVAP test function lets you initiate a leak test for the vehicle's EVAP system, before using the system test function, refer to the vehicle's service repair manual to determine the procedures necessary to stop the test
• Vehicle Information - The option displays the vehicle identification number (VIN),the calibration verification number (CVN), and other information of the test vehicle
• Retrieve generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and pending codes
• Turn off Check Engine Light (MIL), clear codes and reset monitors
• Read live PCM DataStream
• Support CAN (Controller Area Network) and all other
• Multilingual menu and DTC definitions- English, Spanish, and German, etc.
• Read pending DTCs
• Read permanent DTCs
• DTCs search
• Supports most of the OBDII/EOBD test modes include: CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM
• Works on most of 2001 and later OBDII compliant PETROL European vehicles
• Works on most of 2004 and later OBDII compliant DIESEL European vehicles
• Works on most of 1996 and later OBDII compliant US and Asian vehicles
• View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings
• Comprehensive Help, Including OBD Parameter, Mode Explanations & More

Specifications:

• Display - 4.0″ TFT LCD, 480*320 Pixels
• Operation Temperature - 0°C ~ 50°C
• Storage Temperature - -20°C ~ 70°C
• Operating Voltage - 9 ~ 18V
• Operating Current - 150mA at 12V (Typical)
• Power Consumption - 1.8W (Typical)
• Dimension - 206*104.1*32.6 mm (L x W x H)

Please note. This scanner works with a range of vehicle models manufactured after Jan 2006 that feature the OBD2 protocol, and very limited models manufactured between 1996-2006 that are OBD2-compliant. OBD2 compliance is dependent on the year of manufacture for any of the listed models.