IP-COM 16FE+2GE/1SFP Unmanaged Switch With 16-Port PoE (F1118P-16-150W)

SPECIFICATIONS

Standards IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z, IEEE802.3x, IEEE802.3af/atLED indicators 16 * Link/Act LEDs1 * G1 LED 1 * G2/SFP2 LED 1 * PoE-MAX LED 1 * Power LED Interfaces 16 * 10/100 Mbps Base-TX RJ45 ports (Data/Power)2 * 10/100/1000 Mbps Base-T RJ45 ports (Data) 1 * 10/100/1000 Mbps Base-X SFP port (Combo) Lightning protection Port: 6kVPower: 6kV Forwarding mode Store-and-forwardSwitching capability 7.2 GbpsPacket forwarding rate 5.36 MppsBuffer 2.75 MbMAC address table 4KPoE supply Ports 1-16 support standard IEEE802.3af/at30W output per PoE port 130W output of the total PoE Power Power consumption 150W output the whole deviceInput voltage AC100-240V 50/60HzDimensions 294 mm x 178.8 mm x 44 mm(LWH)Four Modes Standard: Default mode of the switch. In this mode, it works as an unmanaged switch; all ports can communicate with each other separately.Priority: In this mode, port G1 and G2/SFP2 serve as uplink ports, ports 1 8 serve as high priority port. All ports can communicate with each other separately. Extend: In this mode, data rate of ports 9 - 16 reduces to 10 Mbps, the maximum transmission distance can be 250 meters, and all ports can communicate with each other. VLAN: In this mode, ports 1 - 16 of the switch can communicate with port G1, G2/SFP2 separately, but cannot communicate with each other. You can enable this mode to reduce broadcast storm and isolate DHCP broadcast. Operating environment Operating temperature: 0C - 45Storage temperature: -40C - 70C Operating humidity: (10% - 90%)RH, non-condensing Storage humidity: (5% - 90%)RH, non-condensing Certificates CCCFCCCERoHS