Kingston 4GB DDR3-1600 SODIMM Memory

DESCRIPTION This document describes ValueRAM's 512M x 64-bit (4GB)DDR3L-1600 CL11 SDRAM (Synchronous DRAM), 1Rx8, lowvoltage, memory module, based on eight 512M x 8-bit FBGAcomponents. The SPD is programmed to JEDEC standardlatency DDR3-1600 timing of 11-11-11 at 1.35V or 1.5V. This204-pin SODIMM uses gold contact fingers. The electrical andmechanical specifications are as follows: FEATURES• JEDEC standard 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~1.575V) Power Supply• VDDQ = 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~ 1.575V)• 800MHz fCK for 1600Mb/sec/pin• 8 independent internal bank• Programmable CAS Latency: 11, 10, 9, 8, 7, 6• Programmable Additive Latency: 0, CL - 2, or CL - 1 clock• 8-bit pre-fetch• Burst Length: 8 (Interleave without any limit, sequential withstarting address “000” only), 4 with tCCD = 4 which does notallow seamless read or write [either on the fly using A12 orMRS]• Bi-directional Differential Data Strobe• Internal(self) calibration : Internal self calibration through ZQpin (RZQ : 240 ohm ± 1%)• On Die Termination using ODT pin• Average Refresh Period 7.8us at lower than TCASE 85°C,3.9us at 85°C < TCASE < 95°C• Asynchronous Reset• PCB: Height 1.18” (30mm), double sided component