Lian Li O11 Dynamic EVO RGB Case White

The Lian Li O11 Dynamic EVO RGB Case features a tempered glass side and front panel, brushed aluminium chassis, dual ARGB light strips, reversible chassis, flexible configuration, supports m-ITX, m-ATX, ATX and E-ATX motherboards, radiator support at the top (up to 420mm), side (up to 360mm), and bottom (up to 360mm), and supports a graphics card of up to 455.7mm in length.

Features

---

O11D EVO RGB

Introducing the all-new O11D EVO RGB, featuring dual ARGB light strips running through the top and bottom of the chassis, creating a stunning look. And the expanded internal space provides greater component compatibility, bringing an exceptional PC-building experience.

• Two L-shaped light strips on top and bottom with befitting lighting effects.
• Front and side tempered glass panels with a removable pillar for a seamless view of components and RGB lighting.
• 2 heights adjustable motherboard rear I/O and mounting points.
• Supports up to 420mm radiator on top, and 360mm radiator on side and bottom.
• Supports 140mm fans x3 on top, side, and bottom.
• Cable management friendly with more space at the second chamber.
• Optional accessories for vertical GPU or upright GPU mounting.
• Reversible chassis
• Dual ARGB strips
• Removable front pillar
• Supports top 420mm radiator
• Supports 10 fans
• Adjustable motherboard installation
• 8 drives capacity
• Cable management friendly

For certain batches, fitting the 3.5″ HDD into the hard drive cage might be challenging.

Two Colours/Two Modes

Derived from the O11D EVO, the O11D EVO RGB can be displayed in two modes with just a few simple steps, allowing for a left or right view. It also comes in two colour options: Black and White.

Black

• Brushed Aluminium
• Black Coated Mesh Panel
• Tinted Tempered Glass

White

• White Coated Mesh Panel
• Clear Tempered Glass
• Aluminium with white powder coating

ARGB Strips on the Top and Bottom

The O11D EVO RGB features a 1.5mm thick L-shaped ARGB strip at both the top and bottom of the chassis that can switch between 14 different lighting effects, adjust brightness and colour, and sync with the motherboard.

M: Next/Previous Light Mode Button: Press 3 seconds to sync MB, press 3 seconds again to cancel. Go back and forth between lighting effects without needing to circle around the loop.

C: Light Colour Button: Switch between 11 colours, press 3 seconds to activate Pure Colour Mode, press 3 seconds again to cancel.

B: Light Brightness Button: Switch between 5 brightness levels-100%, 75%, 50%, 25%,0%.

• RGB Lighting Mode
• Pure Colour Lighting Mode

Completely Unobstructed View

The O11D EVO RGB’s front pillar can now be easily removed, providing a seamless view for showcasing hardware without affecting the case’s structure.

Larger Size, Higher Compatibility

Compared to the O11D EVO, the O11D EVO RGB is slightly larger, which provides higher component compatibility: it supports a 420mm radiator at the top (requires a separate bracket, 360mm radiator at the side/bottom, and 3x140mm fans at all three sides.

Fan/Radiator Support

1. Top

• Radiator：420/360mm
• Fan：3x120mm/3x140mm

2. Side

• Radiator：360/280mm
• Fan：3x120mm/3x140mm

3. Rear

• Fan：1x120mm

4. Bottom

• Radiator：360mm
• Fan：3x120mm/3x140mm

Note: Screw points are missing on the top and bottom when mounting 3x140mm fans; it only supports UNI FAN, which holds well without screws on the top and bottom.

Modular Design Flexible Configuration

Modularity has always been one of the design languages of the O11D EVO series, and the O11D EVO RGB is no exception.

At the bottom of the chassis, the I/O module with a wealth of ports, can be relocated to 3 different locations without the use of any tools.

In addition, we have a separate I/O module O11DE-3XV2/O11DE-3WV2 as an optional accessory to meet the needs of the users that require more I/O ports.

Struggle-Free Fan Brackets

Equipped with a quick-release design, the fan brackets of all three sides can be easily removed or installed.

The side bracket can be flipped vertically or horizontally, offering 4 different installation styles.

• Toward the Main Chamber - Supports up to 83.2 mm thick radiator/ fan combo in the main chamber.
• Toward the Second Chamber - Supports up to 113.7 mm thick radiator/ fan combo in the main chamber.
• Toward the Motherboard (Left Side)
• Toward the Front Panel (Right Side)

The distance between the left-sided and right-sided installation positions reaches 20mm, so users who use EATX motherboards can choose the right-sided installation to avoid the fans from being blocked by the motherboard while gaining more cable management space. Additionally, the O11D EVO RGB features a newly designed vertical corner grommet, making cable management friendlier even when using a large motherboard.

Note: Unlike the O11D EVO, the O11D EVO RGB’s top fan bracket now supports direct radiator installation without disassembly, making it more convenient to use.

Adjustable Motherboard Installation

The O11D EVO RGB features two sets of pilot holes at different heights, allowing the users to adjust the installation position of the motherboard to accommodate different builds.

Note: To install a motherboard with special specifications (e.g., with a thicker shield), please trim the rubber pads accordingly.

Upper Mode

• Top-83.5mm, supports 3 x 120mm/3 x 140mm fans, 360mm/280mm radiator
• Top-63.1mm, supports 420mm radiator
• Bottom-30mm (below the expansion slots), supports 3 x 140mm fans
• Bottom-92.3mm (below a 4-slot thick GPU), supports 3 x 120mm/ 3 x 140mm fans, 360mm/280mm radiator

Lower Mode

• Top-103.8mm, supports 3 x 120mm/3 x 140mm fans, 360mm/280mm radiator
• Top-83.4mm, supports 420mm radiator
• Bottom-30mm (below the expansion slots), supports 3 x 140mm fans
• Bottom-72mm (below a 4-slot thick GPU), supports 120mm/140mm fans, 360mm/280mm radiator

O11D Evo

• Top-83.6mm, supports 3 x 120mm/3 x 140mm fans, 360mm/280mm radiator
• Bottom-70mm (below a 4-slot thick GPU), supports 3 x 120mm