QNAP 10GbE and 2.5GbE Layer 2 Web Managed Switch

The QSW M2106R 2S2T is a Layer 2 Web Managed Switch with two 10GbE SFP fiber ports, two 10GbE RJ45 ports and six 2.5GbE RJ45 ports. Supporting Layer 2 switching and network management via a user friendly web user interface, the QSW M2106R 2S2T offers flexible deployment in hybrid high speed network environments and provides an entry level network management solution. With a half width design, two QSW M2106R 2S2T can be installed in a 1U rack space for space saving.

10GbE connectivity
Includes two 10GbE SFP fiber ports (Backward compatible with 1G SFP) and two 10GbE RJ45 ports, compatible with NBASE T technologies to support five speeds (10G / 5G / 2.5G / 1G / 100M) for high speed networks.

2.5GbE connectivity
Six 2.5GbE RJ45 ports allow you to immediately multiply your network speed by 2.5 times while using existing Cat 5e cables.

User friendly management interface
The QNAP Switch System (QSS) is easy to use and provides an overview dashboard, port management and setting guide, making central network management intuitive.

Layer 2 network
Provides Layer 2 management features (such as LACP, VLAN, ACL and LLDP) for IT staff to efficiently control network bandwidth and enhance security.

RSTP
One of the few web managed switches that supports Rapid Spanning Tree Protocol (RSTP). Easily and efficiently deploy small/medium scale networks that support expansion, redundancy, and loop prevention.

Online firmware update
QSS can be updated with just one click, helping IT staff ensure their network security.

Half width design, two models in 1U
With a half width rackmount design, a QSW M2106R 2S2T can be installed in a 1U rack space with another half width rackmount switch (such as QSW M2108R 2C) for efficient physical space utilization and tidy cabling.

Flexible deployment with multiple 10G SFP fiber and Gigabit ports
The QSW M2106R 2S2T provides two 10GbE SFP ports, two 10GbE RJ45 ports and six 2.5 Gigabit ports for connecting various devices and enabling hybrid high speed networks. With SFP interfaces, Direct Attach Copper (DAC) cables can be used for connecting directly to SFP devices. You can also use RJ45 ports to connect 10GBASE T/NBASE T devices through RJ45 Category 6a (or better) cabling. The switching capacity of the QSW M2106R 2S2T is 110Gbps, guaranteeing the full potential of each port.