The RadioLink CrossFlight CE is a flight controller designed for various types of unmanned vehicles, including airplanes, 2 8 copters, helicopters, cars, boats, and submarines. It features an integrated OSD module and supports multiple ESC protocols.
Key features
- Supports PWM, DShot, and OneShot protocols
- 10 channel PWM output
- Mavlink UART2 without CTSRTS
- Internal flash for parameter storage
- Supports RTK
- Integrated OSD module AT7456E
- 2617 waypoints for multi copters and 2623 waypoints for airplanes, cars, and boats
Specifications
- Brand: RadioLink
- Model: CrossFlight CE
- Weight: 16 5g 0 58oz 54g 1 9oz when all the connect wires included
- Dimension: 39 7 39 7 12 1mm 1 56 1 56 0 48
- Processor: HC32F4A0PITB
- Sensor: GyroAccelerometer QMI8658A, Compass VCM5883L, Barometer SPA06 003
- OSD Module: OSD Module AT7456E Integrated
- FRAM: Without FRAM
- Buzzer: 1
- Switch: None
- Connector Type: JST GH 1 25 Connector
- PWM Output: 10 channel PWM output
- Mavlink UART: 2 without CTSRTS
- USB Port: 1 Type C
- GPS UART: I2C Port1
- Signal Input: PPM SBUS CRSFRSSI Output
- ESC Protocol: PWM DShot and OneShot Protocol
- RTK Support: Yes
- Power Module Specifications Weight: 16 5g 0 58oz without wire
- Input Voltage: 2 12S
- Maximum Detection Current: 90A
- Output Voltage BEC: 5 3V±0 2V
- Output Current BEC: 2A
- Single ESC Maximum Detection Current: 22 5A
- Adaptable Models: Airplane 2 8 Copters Helicopter Car Boat Submarine Radartracker
- USB Voltage: 5V±0 3V
- Servo Voltage: Not applicable
- Operating Temperature: 30 85℃
Package contents
- 1 x Flight Control CrossFlight CE
- 1 x Power Module Support 2 12S
- 1 x Buzzer
- 1 x I2C Transfer Board
- 1 x FC Status Indicate LED
- 1 x 4G TF MicroSD Card
- 1 x BuzzerReceiver Connect Cable
- 1 x Power Module Connect Cable
- 1 x I2C Transfer Board Connect Cable
- 1 x OSD Port Connect Cable
- 2 x TELEM12 Ports Connect Cable
- 1 x FC Status Indicate LED Cable
- 1 x Double sided Adhesive Tape
- 1 x Type C Cable
- 1 x User Manual
- 1 x Packing B