SHURE MXWAPXD2 Access Point Transceiver w/ MIC Charger+Intellimix DSP
Price$1,412
In stock at PC LAN
Price checked today
We may earn a commission if you buy; it doesn't change your price. Check the price at PC LAN before you buy. How we make money
Price history
Tracking since today
The price hasn't changed since we started tracking it. We'll show its history once it does.
About this product
SHURE MXWAPXD2 Access Point Transceiver w/ MIC Charger+Intellimix DSP
The MXWAPXD2 is a 2-channel access point for Microflex® Wireless neXt 2 systems. It combines sophisticated Automatic Frequency Management, powerful IntelliMix® DSP audio processing, convenient microphone charging, and flexible audio and control interfaces in a compact and discreet form factor.
The next step in audio for hybrid events.
- Built-in charging slots for two MXW1X bodypack, MXW2X handheld, or MXW6X boundary transmitters
- Automatic Frequency Management finds open channels in the 1.9 GHz DECT band and avoids interference without interrupting audio
- Onboard IntelliMix® DSP includes automatic mixing, echo cancellation, noise reduction, and automatic gain control to eliminate annoying distractions
- Presets configure the system for presentations or conferences to send mic & program audio to remote participants, room loudspeakers, or both
- Analog, Dante, and USB-C interfaces for easy connection to a computer, sound system, and videoconferencing codec
- Dual RJ45 network ports allow Dante audio and control signals to be separated for increased security
- External USB-C power supply
| Working Range | 45 m (150 ft) Outdoor and line-of-sight between user and MXWAPX. Actual range depends on RF power setting, signal absorption, reflections, and interference. |
| Audio Frequency Response | 30 Hz ‒ 19 kHz (+0.5dB/3dB) Dependent on microphone type and audio output. Microphone transducers not included in measurement. MXWAPX set to Direct Mode. |
| Digital Audio Processing | 24 bit / 48 kHz |
| Digital Audio Networking | Dante, AES67 |
| Security | AES-256 Encryption Dante and DECT over-the-air |
| Latency | 18 ms (nominal) MXW1/2/6/8X microphone input to MXWAPX output. MXWAPX set to SD RF density mode. Latency depends on output port and RF density mode. |
| System Audio Polarity | Positive pressure on MXW1X/2X/6X/8X microphone diaphragm produces positive voltage on + pin (with respect to - pin) of MXWAPX analog output and a positive digital signal on the MXWAPX USB and Dante outputs. |
| Radio Transmission | Time Division Multiple Access (TDMA), Gaussian Frequency Shift Keying (GFSK), 365 kHz max. deviation |
| DECT RF Sensitivity | < -90 dBm |
| DECT RF Transmission Power | RF Power: Low 2 dBm; 2 mW RF Power: Medium 9 dBm; 8 mW RF Power: High 16 dBm (Egypt: 12 dBm); 40 mW (Egypt: 16 dBm) RF Power: Maximum 21 dBm (Egypt: 15 dBm); 125 mW (Egypt: 32 mW) |
| Cable Requirements | Cat 5e or higher, shielded, 100 m maximum between network devices |
| Network Addressing Capability | DHCP, link-local, static |
| Operating Temperature Range | 5℃ (41℉) - 40℃ (104℉) |
| Operating Humidity | RH < 95% |
| Storage Temperature Range | -20℃ (-4℉) to 60℃ (140℉) |
| Analog Input | Line Level Input +28 dBV Aux Level Input +15 dBV |
| Analog Outputs | Line Level Output +17 dBV Aux Level Output +6 dBV Mic Level Output -13 dBV |
| Power Requirement | 4.5V ‒ 5.5V, 2500 mA (via USB-C) |
| Network Interface | Dual ‒ RJ45: Gigabit Ethernet, Dante digital audio |
| Docking Interface | 5 V / 0.5 A |