Brand:Shure
At Mwave In stock
Same price since 29 Oct
Unchanged since we started tracking
We may earn a commission at no cost to you. How it works
Tracking since 29 Oct · 20 days
The price hasn't changed since we started tracking it. We'll show its history once it does.
Featuring rugged metal construction while remaining compact and lightweight, the VP83 is designed to be a reliable partner for your portable video rig. Its integrated shockmount attaches directly to your camera or tripod and impedes camera handling noise and vibrations transferred through a tripod. To reduce noise from light winds, the VP83 is equipped with a foam windscreen. Attached to the VP83 is a coiled 3.5mm TRS cable, so you'll never be missing the cable you need when hurriedly hooking up the mic to your camera.
The omnidirectional microphones found in most cameras pick up sound from all directions, yielding too much ambience and noise. The VP83 uses a supercardioid/lobar polar pattern to focus on sound in front of the mic while attenuating portions of side- and rear-entry sound. Its sensitive condenser capsule and low-noise electronics produce more detailed audio and less hiss than traditional microphones built into cameras.
A coiled cable is permanently attached to the VP83 to provide efficient hookup to your camera without manual cable management. The cable's 3.5mm TRS plug is wired in dual mono, which delivers the mic signal identically to both input channels on your camera or portable recorder.
A single AA alkaline battery powers the VP83 for up to 130 hours of operating time. The power/battery LED will be turn red to warn of low battery levels. Approximately 13 hours of run time remain once the low-battery indicator lights up. To conserve battery life during periods of inactivity, use the power switch to turn off the mic or remove the battery from the battery compartment. NiMH or lithium AA batteries may also be used.
Traffic and HVAC (heating, ventilation, and air conditioning) systems can create a buildup of low-frequency noise that reduces the intelligibility of your audio. When dealing with such factors, activate the low-cut filter to roll off bass frequencies without compromising the integrity of midrange and high frequencies.
Optimal recording levels are crucial to avoiding distortion and lessening noise. The VP83 features a 3-stage gain switch to accommodate common scenarios. The 0 dB setting is recommended when capturing sounds that are slightly louder than typical speech levels. Use the -10 dB option to prevent distortion from loud sources such as concerts or sporting events. Switch to the +20 dB position for quiet sources or typical speech levels.
The VP83 utilizes an integrated Rycote Lyre shockmount to isolate the mic from vibrations and mechanical/handling noise. The bottom of the shockmount features a camera shoe mount with a 1/4"-20 thread, ensuring simple attachment to your camera or a tripod (available separately).
The foam windscreen on the VP83 is designed to lessen undesirable wind noise from breezes, fans, heaters, and air conditioners. For maximum reduction of wind noise in outdoor environments, acquire a furry windshield such as the Shure A83-FUR (available separately).
The VP83's cast aluminum housing provides a durable, rugged frame for rigorous operation in a variety of environments. It also offers enhanced RF immunity to mitigate unwanted audio artifacts from cellular and RF devices.
Mobile Journalist, Vlogger, Run & Gun
For Cameras and Portable Recorders
130-Hour Run Time via AA Battery
Gain and Bass Roll-Off Switches
Attached 3.5mm TRS Output Cable
Power Switch with Battery LED
Compact and Lightweight
Windscreen Reduces Wind Noise
Integrated Shoe/Tripod Shockmount
Microphone
Form Factor : Stand/Boom Mount
Sound Field : Mono
Element Type : Electret Condenser
Polar Pattern : Lobar, Supercardioid
Orientation : End Address
Circuitry : Solid-State
Gain Adjustment : -10 dB to +20 dB
On-Board Controls : Gain/Sensitivity, High-Pass Filter, On/Off
Performance
Frequency Range: 50 Hz to 20 kHz
Maximum SPL : 129 dB SPL (1 kHz, 1% THD, 1-Kilohm Load)
Off-Axis Rejection : 4 dB at 60°, 18 dB at 120°, 17 dB at 180°
Sensitivity : -36.5 dBV/Pa at 1 kHz (Open Circuit Voltage)
Dynamic Range : 111.6 dB (1 kHz, 1-Kilohm Load)
Signal-to-Noise Ratio : 76.6 dB A-Weighted
Connectivity
Output Connector : 1 x 1/8" / 3.5 mm TRS
Number of Conductors : 2
Power
Operating Voltage : Not Specified by Manufacturer
Battery Type : 1 x AA (Included)
Physical
Color : Black
Mounting Thread Size : 1/4"-20 Female
Dimensions : H: 3.3 x W: 1.7 x L: 5.9" / H: 83.82 x W: 43.18 x L: 149.86 mm
Weight : 4.7 oz / 133.25 g
Packaging Info
Package Weight : 0.58 kg
Box Dimension : (LxWxH) 25.65 x 13.72 x 10.92 cm