Simplecom SA536 USB to M.2 and SATA 2 in 1 Adapter

The Simplecom SA536 2-in-1 USB Adaptor provides USB-C connectivity up to 10Gbps for NVMe or SATA M.2 SSDs and 2.5in or 3.5in SATA HDD/SSDs. Featuring a toggle switch for selecting the M.2 or SATA mode, plus an external power adaptor for 3.5in drives, the SA536 provides convenient plug and play access for data migration, backup and storage management.

Note: Images are for illustrative purposes, hard drive and SSDs not included.

Features

---

Simplecom SA536 USB to M.2 and SATA 2-IN-1 Adaptor for 2.5"/3.5" HDD & NVMe/SATA M.2 SSD with Power Supply USB 3.2 Gen2 10Gbps

SA536 is a 2-IN-1 USB adaptor with SATA and M.2 sockets. This dual slot adaptor is an all in one solution for most common storage drives, SATA socket supports 2.5" and 3.5" SATA HDD or SSD, M.2 socket supports both NVMe and SATA protocol based M.2 SSDs. With the toggle switch, you can quickly select between SATA and M.2 modes.

Plug and play and easy to use, this adaptor lets you easily access and swap SATA or M.2 drives without having to install your drives into an enclosure or PC tower. USB 3.2 Gen 2 interface for super-fast read and write speed up to 10Gbps.

No need to worry about which type of SATA or M.2 drive you have, this adaptor can convert any SATA or M.2 drive to USB for easy access on your computer. Perfect for fast access of all types of SATA HDDs and M.2 SSDs, and can be used for data migration, data backup and more.

This adaptor comes with an external power supply, which enables the adaptor to power and access desktop 3.5" SATA hard drive, and no external power needed for 2.5” SATA drive and M.2 SSD.

• 2-IN-1 USB adaptor with SATA and M.2 sockets
• Supports NVMe and SATA M.2 SSD
• Supports 2.5" and 3.5" SATA HDD/SDD with SATA I/II/III interface
• Toggle button to quickly switch between SATA and M.2
• USB 3.2 Gen2 interface support up to 10Gbps data transfer rate
• Plug and play, no driver required
• Supports UASP for faster data transfer speed and maximum performance
• Supports TRIM command for improved data writing to extend SSD life
• With external power adaptor for 3.5" hard drives
• LED light indicates Power and Activity status

Important Notes

• External power is Not required when using 2.5" SATA drive or M.2 SSD, they can be powered by USB.
• External power is required for 3.5" SATA HDD, please connect USB cable before connecting power cable.
• SATA and M.2 sockets can't be used simultaneously, toggle button need to be selected to SATA or M.2 mode.