Startech 2 Port USB-A 3.1 Gen 2 10Gbps PCIe Expansion Card
Price$56.95
Out of stock at Umart
Price checked today
We may earn a commission if you buy; it doesn't change your price. Check the price at Umart before you buy. How we make money
Price history
Tracking since today
The price hasn't changed since we started tracking it. We'll show its history once it does.
About this product
Startech 2 Port USB-A 3.1 Gen 2 10Gbps PCIe Expansion Card
This PCIe USB 3.2 Gen 2 controller card installs into an available PCI-Express x4 slot in your computer and enables you to upgrade your current system by adding two SuperSpeed USB-A (10Gbps) ports.
SPECIFICATIONS:
| Connector Type(s) | 1 - PCI Express x4 |
| Internal Ports | 1 - SATA Power (15 pin) |
| External Ports | 2 - USB 3.2 Type-A (9 pin, Gen 2, 10Gbps) |
| Operating Temperature | 5°C to 50°C (41°F to 122°F) |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
| Humidity | 20%~80% RH |
| Ports | 2 |
| Interface | PCI Express x4 |
| Bus Type | USB 3.2 Gen 2 10Gbps |
| Card Type | Standard Profile (LP bracket incl.) |
| Port Style | Integrated on Card |
| Industry Standards | USB 3.2 Specification PCI Express Base Specification Rev. 3.0 Intel xHCI Specification Rev. 1.1 UASP (USB Attached SCSI Protocol) Rev. 1.0 |
| Chipset ID | ASMedia - ASM3142 |
| Package Height | 1.4 in [3.5 cm] |
| Package Length | 5.7 in [14.5 cm] |
| Shipping (Package) Weight | 4.8 oz [135.0 g] |
| Package Width | 8.5 in [21.5 cm] |
| Package Quantity | 1 |
| Total USB Power Output | 4.5W (5V @ 0.9A) nominal, per port - Current draw above 2.0A (10W) will initiate Over-Current Protection |
| Maximum Data Transfer Rate | 10Gbps |
| Type and Rate | USB 3.2 Gen 2 - 10 Gbit/s |
| UASP Support | Yes |
| Color | Black |
| Product Height | 0.7 in [1.9 cm] |
| Product Length | 3.9 in [10.0 cm] |
| Weight of Product | 2.3 oz [65.0 g] |
| Product Width | 4.7 in [12.0 cm] |
| OS Compatibility | Windows® 7, 8, 8.1, 10, 11 Windows Server® 2012 R2, 2016, 2019, 2022 macOS 10.13 to 10.15, 11.0, 12.0, 13.0, 14.0 Linux® 3.5 and up - LTS Versions only |
| System and Cable Requirements | PCI Express enabled computer or server with a PCI Express x4 slot or higher (x8, x16) |
| Included in Package | 1 - USB 3.1 Card 1 - Full-Profile Bracket (Pre-Installed) 1 - Low-Profile Bracket 1 - Quick Start Guide |