Synology 60 Bay Fast and Scalable 4U SAS Storage Server for Multi-Petabyte Applications - 4U (HD6500)

SPECIFICATIONS

CPUCPU ModelIntel Xeon Silver 4210RCPU Quantity2CPU Architecture64-bitCPU Frequency10-core 2.4 (base) / 3.2 (turbo) GHzHardware Encryption Engine (AES-NI)MEMORYSystem Memory64 GB DDR4 ECC RDIMMMemory Module Pre-installed64 GB (32 GB x 2)Total Memory Slots16Maximum Memory Capacity512 GB (32 GB x 16)NotesSynology reserves the right to replace memory modules with the same or higher frequency based on supplier's product life cycle status. Rest assured that the compatibility and stability have been strictly verified with the same benchmark to ensure identical performance.Please select Synology memory modules for optimum compatibility and reliability. Synology will not provide complete product warranty or technical support if non-Synology memory modules are used for memory expansion.For more information about the recommended memory configurations, please check the Hardware Installation Guide of your Synology product.STORAGEDrive Bays60Maximum Drive Bays with Expansion Unit300 (RX6022sas x 4)SAS multipathingCompatible Drive Type* 3.5" SAS HDD2.5" SATA SSDHot Swappable DriveNotesSynology only guarantees full functionality, reliability, and performance for Synology drives listed on the compatibility list. The use of non-validated components may limit certain functionality and result in data loss and system instability.Two Synology 480 GB SATA SSDs are included in the accessory pack for use as system drives.To install 2.5" SATA SSDs, optional 2.5" drive trays (R5) must be purchased separately. EXTERNAL PORTSRJ-45 1GbE LAN Port2 (with Link Aggregation / Failover support)RJ-45 10GbE LAN Port2 (with Link Aggregation / Failover support)Out-of-Band Management LAN Port1Max. number of LAN ports15USB 3.2 Gen 1 Port2Expansion Port2NotesThe USB 3.0 standard was renamed to USB 3.2 Gen 1 by the USB Implementers Forum (USB-IF) in 2019.Besides the 5 built-in LAN ports, up to 10 additional LAN ports can be made available by installing compatible network interface cards (sold separately).PCIEPCIe Expansion2 x Gen3 x16 slot (x16 link)2 x Gen3 x8 slots (x8 link)FILE SYSTEMInternal DrivesBtrfsExternal DrivesBtrfsEXT4EXT3FATNTFSHFS+exFATNotesexFAT Access can be installed for free from Package Center in DSM 7.0. In DSM 6.2 or earlier versions, exFAT Access needs to be purchased in Package Center.APPEARANCEForm Factor (RU)4USize (Height x Width x Depth)176 mm x 482 mm x 1020 mmWeight37.9 kgRack Installation Support4-post 19" rack (Synology Rail Kit - RKS-03)OTHERSSystem Fan80 mm x 80 mm x 4 pcsFan Speed ModeFull-Speed ModeCool ModeQuiet ModeEasy Replacement System FanPower RecoveryNoise Level60.8 dB(A)Scheduled Power On / OffWake on LAN / WANPower Supply Unit / Adapter1600 WRedundant Power SupplyAC Input Power Voltage200V to 240V ACPower Frequency50/60 Hz, Single PhasePower Consumption1025.2 W (Access) 418 W (HDD Hibernation)British Thermal Unit3495.93 BTU/hr (Access) 1425.38 BTU/hr (HDD Hibernation)NotesNoise Level Testing Environment: Fully loaded with Synology HAS5300-8T hard drive(s) in the idle state. Two G.R.A.S. Type 40AE microphones, each set up 1 meter away from the Synology NAS at the front and rear. Background noise: 16.49-17.51 dB(A); Temperature: 24.25-25.75C; Humidity: 58.2-61.8%Power consumption is measured when it is fully loaded with Synology 8TB HAS5300-8T hard drive(s).Operating Temperature0C to 35C (32F to 95F)Storage Temperature-20C to 60C (-5F to 140F)Relative Humidity5% to 95% RHCertificationFCCCEBSMIVCCIRCMUKCAEACCCCKCULEnvironmentRoHS CompliantPackaging ContentMain Unit X 1Synology 480GB SATA SSD X 2Rail Kit Sliding: RKS-03 X 1Accessory Pack X 1AC Power Cord X 2Quick Installation Guide X 1