Teltonika RUT241 Industrial Cellular Router (NHT-RUT241)

SPECIFICATIONS

MOBILEMobile module4G LTE Cat 4 up to 150 DL/50 UL Mbps; 3G up to 21 DL/5.76 UL Mbps; 2G up to 236.8 DL/236.8 UL kbps 3GPP ReleaseRelease 10/11 depending on the hardware version eSIM*Consumer type eSIM, profile download and removal operations, up to 7 eSIM profiles; does not include data plans Feature availability varies by order code SIM switch1 x 2FF SIM and 1 x eSIM, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail *Feature availability varies by order code StatusIMSI, ICCID, operator, operator state, data connection state, network type, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC SMSSMS status, SMS configuration, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP USSDSupports sending and reading Unstructured Supplementary Service Data messages Block/Allow listOperator block/allow list (by country or separate operators) Multiple PDNPossibility to use different PDNs for multiple network access and services Band managementBand lock, Used band status display SIM PIN code managementSIM PIN code management enables setting, changing, or disabling the SIM card's PIN APNAuto APN BridgeDirect connection (bridge) between mobile ISP and device on LAN PassthroughRouter assigns its mobile WAN IP address to another device on LAN WIRELESSWireless mode802.11b/g/n (Wi-Fi 4), Access Point (AP), Station (STA) Wi-Fi securityWPA2-Enterprise: PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto-cipher modes, client separation, EAP-TLS with PKCS#12 certificates, disable auto-reconnect, 802.11w Protected Management Frames (PMF) SSID/ESSIDSSID stealth mode and access control based on MAC address Wi-Fi usersUp to 50 simultaneous connections Wireless Connectivity FeaturesFast roaming (802.11r), Relayd, BSS transition management (802.11v), radio resource measurement (802.11k) Wireless MAC filterAllowlist, blocklist Wireless QR code generatorOnce scanned, a user will automatically enter your network without needing to input login information TravelMateForward Wi-Fi hotspot landing page to a subsequent connected device ETHERNETWAN1 x WAN port 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX LAN1 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX NETWORKRoutingStatic routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing Network protocolsTCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL), VXLAN VoIP passthrough supportH.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets Connection monitoringPing Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection FirewallPort forward, traffic rules, custom rules, TTL target customisation Firewall status pageView all your Firewall statistics, rules, and rule counters Ports managementView device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on Network topologyVisual representation of your network, showing which devices are connected to which other devices HotspotCaptive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorisation, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customisable themes and optionality to upload and download customised hotspot themes DHCPStatic and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards QoS / Smart Queue Management (SQM)Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e DDNSSupported >25 service providers, others can be configured manually DNS over HTTPSDNS over HTTPS proxy enables secure DNS resolution by routing DNS queries over HTTPS Network backupWi-Fi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover Load balancingBalance Internet traffic over multiple WAN connections SSHFSPossibility to mount remote file system via SSH protocol Traffic ManagementReal-time monitoring, wireless signal charts, traffic usage history SECURITYAuthenticationPre-shared key, digital certificates, X.509 certificates, TACACS+, Internal & External RADIUS users authentication, IP & login attempts block, time-based login blocking, built-in random password generator FirewallPreconfigured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI, DMZ, NAT, NAT-T, NAT64 Attack preventionDDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks) VLANPort and tag-based VLAN separation Mobile quota controlMobile data limit, customizable period, start time, warning limit, phone number WEB filterBlacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only Access controlFlexible access control of SSH, Web interface, CLI and Telnet SSL certificate generationLet's Encrypt and SCEP certificate generation methods 802.1xPort-based network access control server VPNOpenVPNMultiple clients and a server can run simultaneously, 27 encryption methods OpenVPN EncryptionDES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256 IPsecXFRM, IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16) GREGRE tunnel, GRE tunnel over IPsec support PPTP, L2TPClient/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support StunnelProxy designed to add TLS encryption functionality to existing clients and servers without any changes in the programs code DMVPNMethod of building scalable IPsec VPNs, Phase 2 and Phase 3 and Dual Hub support SSTPSSTP client instance support ZeroTierZeroTier VPN client support WireGuardWireGuard VPN client and server support TincTinc offers encryption, authentication and compression in it's tunnels. Client and server support. OPC UASupported modesClient, Server Supported connection typesTCP MODBUSSupported modesServer, Client Supported connection typesTCP Custom registersMODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality Supported data formats8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII DATA TO SERVERProtocolHTTP(S), MQTT, Azure MQTT Data to serverExtract parameters from multiple sources and different protocols, and send them all to a single server; Custom LUA scripting, allowing scripts to utilize the router's Data to server feature MQTT GATEWAYModbus MQTT GatewayAllows sending commands and receiving data from MODBUS Server through MQTT broker DNP3Supported modesStation, Outstation Supported connectionTCP DLMS/COSEMDLMS SupportDLMS - standard protocol for utility meter data exchange Supported modesClient Supported connection typesTCP APITeltonika Networks Web API (beta) supportExpand your device's possibilities by using a set of configurable API endpoints to retrieve or change data. For more information, please refer to this documentation: https://developers.teltonika-networks.comMONITORING & MANAGEMENTWEB UIHTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, multiple event log servers, firmware update availability notifications, event log, system log, kernel log, Internet status FOTAFirmware update from server, automatic notification SSHSSH (v1, v2) SMSSMS status, SMS configuration CallReboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, Wi-Fi on/off TR-069OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem MQTTMQTT Broker, MQTT publisher SNMPSNMP (v1, v2, v3), SNMP Trap, Brute force protection JSON-RPCManagement API over HTTP/HTTPS RMSTeltonika Remote Management System (RMS) IOT PLATFORMSThingWorxAllows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type Cumulocity - Cloud of ThingsAllows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength. Has reboot and firmware upgrade actions Azure IoT HubCan be configured with Data to Server to send all the available parameters to the cloud. Has Direct method support which allows to execute RutOS API calls on the IoT Hub. Also has Plug and Play integration with Device Provisioning Service that allows zero-touch device provisioning to IoT Hubs AWS IoT CoreUtility to interact with the AWS cloud platform. Jobs Support: Call the device's API using AWS Jobs functionality SYSTEM CHARACTERISTICSCPUMediatek, 580 MHz, MIPS 24KEcRAM128 MB, DDR2 FLASH storage16 MB, SPI Flash FIRMWARE / CONFIGURATIONWEB UIUpdate FW from file, check FW on server, configuration profiles, configuration backup FOTAUpdate FW RMSUpdate FW/configuration for multiple devices at once Keep settingsUpdate FW without losing current configuration Factory settings resetA full factory reset restores all system settings, including the IP address, PIN, and user data to the default manufacturer's configuration FIRMWARE CUSTOMISATIONOperating systemRutOS (OpenWrt based Linux OS) Supported languagesBusybox shell, Lua, C, C++ Development toolsSDK package with build environment provided GPL customizationYou can create your own custom, branded firmware and web page application by changing colours, logos, and other elements in our firmware to fit your or your clients needs Package ManagerThe Package Manager is a service used to install additional software on the device INPUT / OUTPUTInput1 x Digital Input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high Output1 x Digital Output, Open collector output, max output 30 V, 300 mA EventsEmail, RMS, SMS I/O jugglerAllows to set certain I/O conditions to initiate event POWERConnector4-pin industrial DC power socketInput voltage range9 30 VDC, reverse polarity protection; surge protection >31 VDC 10us max PoE (passive)Passive PoE over spare pairs. Possibility to power up through LAN1 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 - 30 VDC Power consumption< 6.5 W Max PHYSICAL INTERFACESEthernet2 x RJ45 ports, 10/100 Mbps I/Os1 x Digital Input, 1 x Digital Output on 4-pin power connector Status LEDs3 x Connection type status LEDs, 5 x Connection strength LEDs, 2 x LAN status LEDs, 1 x Power LEDSIM1 x SIM slot (Mini SIM 2FF), 1.8 V/3 V, external SIM holder Power1 x 4-pin power connector Antennas2 x SMA for LTE, 1 x RP-SMA for Wi-Fi antenna connectors ResetReboot/User default reset/Factory reset button PHYSICAL SPECIFICATIONCasing materialAluminium housing, plastic panels Dimensions (W x H x D)83 x 25 x 74 mm Weight125 g Mounting optionsDIN rail, wall mount, flat surface (all require additional kit) OPERATING ENVIRONMENTOperating temperature-40 C to 75 C Operating humidity10% to 90% non-condensing Ingress Protection RatingIP30 REGULATORY & TYPE APPROVALSRegulatoryCE, UKCA, ANRT, Kenya, ICASA, FCC, IC, PTCRB, NOM, RCM, KC, Giteki, IMDA, E-mark, CB, UL/CSA Safety, RoHS, REACH, R118 OperatorAT&T, Verizon, T-Mobile, Uscellular EMC EMISSIONS & IMMUNITYStandardsEN 55032:2015 + A11:2020 EN 55035:2017 + A11:2020 EN IEC 61000-3-2:2019 EN 61000-3-3:2013 + A1:2019 EN 301 489-1 V2.2.3 EN 301 489-17 V3.2.4 Final Draft EN 301 489-52 V1.2.0ESDEN 61000-4-2:2009 Radiated ImmunityEN IEC 61000-4-3:2020 EFTEN 61000-4-4:2012 Surge Immunity (AC Mains Power Port)EN 61000-4-5:2014 + A1:2017 CSEN 61000-4-6:2014 DIPEN 61000-4-11:2020 RFStandardsEN 300 328 V2.2.2 EN 301 511 V12.5.1 EN 301 908-1 V15.2.1 EN 301 908-2 V13.1.1 EN 301 908-13 V13.2.1 SAFETYStandardsCE: EN IEC 62368-1:2020 + A11:2020, EN IEC 62311:2020, EN 50665:2017 RCM: AS/NZS 62368.1:2022 CB: IEC 62368-1:2018 UL/CSA Safety: UL 62368-1, Ed. 3 dated December 13, 20, CAN/CSA C22.2 No. 62368-1:19