Thermal Grizzly Intel 12th Gen Lapping Tool
In stock at PC Case Gear
Price checked today
We may earn a commission if you buy; it doesn't change your price. Check the price at PC Case Gear before you buy. How we make money
Price history
Tracking since today
The price hasn't changed since we started tracking it. We'll show its history once it does.
About this product
- Brand
- Thermal Grizzly
- Store
- PC Case Gear
- Category
- Electronics > Electronics Accessories > Computer Components > Computer System Cooling Parts > All-in-One Liquid CPU Coolers
- SKU
- TG-ILT-12G
(Special Price! Reduced to clear) The Thermal Grizzly 12th Gen Lapping-Tool is specially designed for the Thermal Grizzly Intel 12th/13th/14th Gen Contact Frame (sold separately) and simplifies the process of lapping the processor. Using the enclosed screws, the CPU is simply mounted on the Lapping-Tool with the Contact Frame. This simulates the actual final position of the CPU in the socket on the motherboard.
This allows the heatspreader (IHS) of the CPU to be ground, or lapped, in the state in which it will be operated. If you were to grind the CPU by hand, the contact pressure during installation in the socket would cause the IHS to bulge again.
Note: Lapping the IHS is performed at your own risk and always results in the complete invalidation of the warranty.
Features
Thermal Grizzly Lapping Tool
- Simplifies the lapping of the CPU
- Protects the Intel 12th Gen Contact Frame
- CNC-milled acrylic glass
- Complete set with sandpaper
As with the Intel 12th Gen Contact Frame, experienced over clockers were also involved in the development of the lapping tool. In addition to Roman "der8auer" Hartung, Allen "Splave" Golibersuch was involved in the design process. Allen was able to achieve two world records with the help of the combination of Contact Frame and the grinding of the CPU with the Lapping Tool.
The tolerances of the lapping tool allow the heatspreader to be ground down by 0.2 millimetres before the acrylic glass of the lapping tool is removed. If the acrylic is being lapped down, stop grinding immediately. This tolerance was deliberately chosen to prevent too much material from being removed from the IHS and to avoid damaging the contact frame.
It is recommended to grind off the heatspreader by a maximum of 40-150µm. It should be noted that grinding the CPU will void the warranty. For the largest possible contact area between the IHS and the base plate of the CPU cooler, the latter should also be ground.