Thermaltake Pacific PCTG Hard Tube 16mm OD 12mm ID 1000mm 4 Pack

The Thermaltake Pacific PCTG Hard Tube 16mm OD 12mm ID 1000mm 4 Pack features four transparent PCTG tubes, each measuring 1000mm in length with an outer diameter of 16mm and an inner diameter of 12mm. Crafted from high-quality PCTG, these tubes offer excellent transparency and can withstand temperatures up to 70C, ensuring durability and reliability in custom liquid cooling systems. They are compatible with 16mm OD fittings, allowing for secure and leak-free connections in open-loop water cooling configurations.

Features

---

Pacific PCTG Hard Tube 16mm OD 12mm ID 1000mm 4 Pack

Designed for higher temperature tolerance, the Pacific PCTG Hard Tube series is made of PCTG, providing reliable and durable rigid tubing for custom liquid cooling configurations.

DIY Liquid Cooling with Pacific PCTG Hard Tube

Thermaltake introduces the Pacific PCTG Hard Tube for custom PC water cooling systems. Crafted from premium PCTG, it enables users to achieve precise tubing layouts that suit their preferences. Compatible with 16mm OD fittings, it ensures secure installation, smooth connections, and ideal flow, turning your build into a showcase-worthy masterpiece.

• Outer Diameter: 16 mm
• Inner Diameter: 12 mm
• Length: 1000mmx4

Tt LCS Certified

Tt LCS Certified is a Thermaltake exclusive certification applied only to products that pass the design and hardcore enthusiasts standards that a true LCS chassis should hold to. The Tt LCS certification was created so that we at Thermaltake can indicate to all power users which chassis have been tested to be best compatible with extreme liquid cooling configurations, ensuring you get the best performance from the best features and fitment.

100% PCTG with High Temperature Resistance

The Pacific PCTG Hard Tube is constructed from high-quality PCTG, a reliable and non-toxic material with excellent transparency. Its thicker walls enhance durability, ensuring safe operation and accurate tubing runs. The Pacific PCTG Hard Tube can withstand temperatures of up to 70°C/158°F, enhancing the stability of the custom liquid cooling system.

Remarkable Expansion

The Pacific PCTG Hard Tube is pre-cut into retail coils of four 1000mm lengths, allowing enthusiasts to build up visually striking custom liquid cooling systems by allocating the liquid cooling component based on their style.

*Coolant operating temperature exceeding 70°C/158°F may potentially affect the PCTG tube.

Cautions

Thermaltake recommends the following steps to be taken after completing your water loop setup

• It is strongly recommended to use market-proven pre-mixed coolant, such as Thermaltake Coolant 1000, which offers great performance while preventing corrosion in the entire cooling system (copper, brass, nickel, aluminium, and steel).
• Fill the reservoir with coolant and cycle the power on and off several times while the pump pushes the coolant into the loop.
• DO NOT let the pump run dry. If no liquid is entering the pump, turn off the power immediately.
• Fill the reservoir to the top to prevent air from entering the pump.
• If necessary, tilt the system slightly from side to side to bleed the air out of the loop.
• Place paper towels under fittings and joining points to test for leaks.
• Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop.
• Before starting, flush out the system properly to prevent any coolant or unwanted particles from sticking to your tubes, radiators, and other cooling components.
• Coolant might fade over time.