TP-Link BE12000 Ceiling Mount Tri-Band Wi-Fi 7 Access Point (EAP787)

SPECIFICATIONS:HARDWARE FEATURESInterface 1 10G/2.5G Ethernet PortButton ResetPower Supply 802.3bt/at PoE or 12V/2.5A DCMax. Power Consumption 26.3 W (For PoE); 22.4 W (For DC) Dimensions ( W x D x H ) 8.7 8.7 1.5 in (220 220 38.8 mm)Antenna 2.4 GHz: 2 4.0 dBi 5 GHz: 4 5.0 dBi 6 GHz: 2 5.0 dBi Bluetooth 1 5 dBi (peak gain), Internal antenna module Firmware update may be required. Mounting Ceiling / Wall/ Junction Box Mounting (Kits Included)WIRELESS FEATURESCoverage 2050 ft (190 m) Coverage value is calculated based on laboratory testing. Actual coverage is not guaranteed and will vary as a result of client limitations and environmental factors.Concurrent Clients 510+* The actual capacity depends on the wireless environment and client traffic and is generally less than the maximum number of client connections.Wireless Standards IEEE 802.11 a/b/g/n/ac/ax/beFrequency 6 GHz, 5 GHz, and 2.4 GHzSignal Rate 688 Mbps (2.4 GHz) + 5765 Mbps (5 GHz) + 5765 Mbps (6 GHz) Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. The 320 MHz bandwidth is only available on the 6 GHz band. Simultaneously, the 320 MHz bandwidth on the 6 GHz band and 160 MHz bandwidth on the 5 GHz band may be unavailable in some regions/countries due to regulatory restrictions. Actual wireless data throughput and coverage are not guaranteed and will vary.Wireless Functions 320 MHz Bandwidth MLO 4K-QAM* Multi-RUs* Seamless Roaming(802.11k/v/r) MU-MIMO* Mesh** BSS Coloring* OFDMA* Load Balance Band Steering Beamforming Airtime Fairness Multiple SSIDS:24(8 on each band) Wireless Schedule Reboot Schedule QoS(WMM) Rate Limit Static IP/Dynamic IP RADIUS Accounting MAC Authentication *Use of Wi-Fi 7 (802.11be), Wi-Fi 6 (802.11ax), and features including Multi-Link Operation (MLO), 320 MHz Bandwidth, 240 MHz Bandwidth, 160 MHz Bandwidth, 6 GHz, 4K-QAM, Multi-RUs, OFDMA, and MU-MIMO requires clients to also support the corresponding features.*Omada Mesh, Seamless Roaming, Captive Portal, and Cloud Access require the use of an Omada controller.Wireless Security Captive Portal Authentication Access Control Mac Filter Wireless Isolation Between Clients VLAN Rogue AP Detection WPA-Personal/Enterprise, WPA2-Personal/Enterprise, WPA3-Personal/Enterprise *Omada Mesh, Seamless Roaming, Captive Portal, and Cloud Access require the use of an Omada controller.Transmission Power 6-20 dBm (2.4 GHz, EIRP)9-23 dBm (5 GHz, U-NII-1 & U-NII-2A, EIRP) 9-30 dBm (5 GHz, U-NII-2C, EIRP) 6-23 dBm (6 GHz, EIRP) MANAGEMENT FEATURESOmada App YesCentralized Management Omada Central (Cloud-Based) Omada Hardware Controller Omada Software Controller Cloud Access Yes. Require the use of an Omada controller.Email Alerts YesLED ON/OFF Control YesManagement MAC Access Control YesSNMP v1, v2c, v3System Logging Local/Remote Syslog YesWeb-based Management YesOTHERSCertification CE, FCC, RoHS, ICPackage Content EAP787 Installation Guide Ceiling/Wall/Junction Box Mounting Kit Note: Power Adapter is NOT included. Environment Operating Temperature: 0 C40 C (32 F104 F); Storage Temperature: -40 C70 C (-40 F158 F); Operating Humidity: 10%90% non-condensing; Storage Humidity: 5%90% non-condensing;