TP-Link BE3600 Wall Plate Wi-Fi 7 Access Point (EAP725-Wall) - OPENED BOX 92129

SPECIFICATIONS:HARDWARE FEATURESInterface Uplink: 1 2.5G Ethernet Port Downlink: 1 2.5G Ethernet Port + 2 Gigabit Ethernet Ports (The 2.5G port supports PoE pass-through. The PoE pass-through feature requires 802.3at/bt input.) Physical Security Lock NoButton Reset, LEDPower Supply 802.3at/bt PoEPower Consumption 802.3bt: 17W (PoE Out support 15.4W) 802.3at: 17W (PoEOut support 7W) Dimensions 143 86 40 mm (5.6 3.4 1.6 in)Antenna 4 Internal Antennas 2.4 GHz: 2 4 dBi 5 GHz: 2 5 dBi Mounting Wall Mounting (Kits included)WIRELESS FEATURESCoverage 50 (600 ft)**Concurrent Clients 250+Wireless Standards IEEE 802.11 a/b/g/n/ac/ax/beFrequency 2.4 GHz and 5 GHzSignal Rate 5 GHz: Up to 2882 Mbps 2.4 GHz: Up to 688 Mbps Wireless Functions 16 SSIDs (Up to 8 SSIDs on each band) Enable/Disable Wireless Radio Automatic Channel Assignment Transmit Power Control (Adjust Transmit Power on dBm) QoS(WMM) Seamless Roaming Beamforming Rate Limit (Based on SSID/Client) Load Balance Airtime Fairness Band Steering Reboot Schedule Wireless Schedule RADIUS Accounting MAC Authentication Wireless Statistics Static IP/Dynamic IP Wireless Security Captive Portal Authentication Access Control Wireless Mac Address Filtering Wireless Isolation Between Clients VLAN Rogue AP Detection WPA-Personal/Enterprise, WPA2-Personal/Enterprise, WPA3-Personal/Enterprise Transmission Power <20 dBm (2.4GHz, EIRP)<23 dBm (5GHz, band 1 & band 2, EIRP) <25 dBm (5GHz, band 3, EIRP) MANAGEMENTOmada App YesCentralized Management Omada Hardware Controller (OC300) Omada Hardware Controller (OC200) Omada Software Controller Omada Cloud-Based Controller Cloud Access Yes. Requiring the use of OC300, OC200, Omada Cloud-Based Controller, or Omada Software Controller.Email Alerts YesLED ON/OFF Control YesManagement MAC Access Control YesSNMP v1, v2c, v3System Logging Local/Remote Syslog System LogSSH YesWeb-based Management YesL3 Management YesMulti-site Management YesManagement VLAN YesZero-Touch Provisioning Yes. Requiring the use of Omada Cloud-Based Controller.OTHERSCertification CE, RoHSPackage Contents BE3600 Wall Plate Wi-Fi 7 Access Point Installation Guide Mounting Kits System Requirements Microsoft Windows XP, Vista, Windows 7, Windows 8, Windows10, Windows 11, LinuxEnvironment Operating Temperature: 040 (32104 ) Storage Temperature: -4070 (-40158 ) Operating Humidity: 1090% RH non-condensing Storage Humidity: 590% RH non-condensing NotesMaximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. The 160 MHz bandwidth is only available on the 5GHz band. It may be unavailable in some regions/countries due to regulatory restrictions. Actual wireless data throughput, wireless coverage, and connected devices are not guaranteed and will vary as a result of internet service provider factors, network conditions, client limitations, and environmental factors, including building materials, obstacles, volume and density of traffic, and client location. Use of Wi-Fi 7 (802.11be) and features including 160 MHz Bandwidth, 4K-QAM, Multi-RUs, OFDMA and MU-MIMO requires clients to also support the corresponding features. **The actual capacity depends on the wireless environment and client traffic and is generally less than the maximum number of client connections. Coverage value is calculated based on laboratory testing. Actual coverage is not guaranteed and will vary as a result of client limitations and environmental factors. Omada Mesh, Seamless Roaming, Captive Portal, and Cloud Access require the use of an Omada SDN controller. Please refer to the User Guides of Omada SDN controllers for configuration methods.