TP-Link Omada AX5400 Ceiling Mount WiFi 6 Access Point (EAP673)

SPECIFICATIONS:HARDWARE FEATURESInterface 1 2.5 Gigabit Ethernet (RJ-45) Port (supports IEEE802.3at PoE)Button ResetPower Supply 802.3at PoE 12 V / 2 A DC (Power adapter not included) Max. Power Consumption EU: 20.8 W US: 22.3 W Dimensions ( W x D x H ) 8.7 8.7 1.3 in (220 220 32.5 mm)Antenna Internal Omni 2.4 GHz: 2 4 dBi 5 GHz: 4 5 dBi Bluetooth YesMounting Ceiling /Wall Mounting (Kits included)WIRELESS FEATURESCoverage 140(1500 ft)Concurrent Clients 250+Wireless Standards IEEE 802.11ax/ac/n/g/b/aFrequency 2.4 GHz and 5 GHzSignal Rate 5 GHz: Up to 4804 Mbps 2.4 GHz: Up to 574 Mbps Wireless Functions 1024-QAM 4 Longer OFDM Symbol OFDMA Multiple SSIDs (Up to 16 SSIDs, 8 for each band) Enable/Disable Wireless Radio Automatic Channel Assignment Transmit Power Control (Adjust Transmit Power on dBm) QoS(WMM) MU-MIMO HE160 (160 MHz Bandwidth) Seamless Roaming Omada Mesh Band Steering Load Balance Airtime Fairness Beamforming Rate Limit Reboot Schedule Wireless Schedule Wireless Statistics based on SSID/AP/Client * Use of WiFi 6 (802.11ax) and its features, including OFDMA, HE160, and 1024-QAM, require clients to support the corresponding features. The 160 MHz bandwidth is only available on the 5 GHz band. It may be unavailable in some regions/countries due to regulatory restrictions. The double channel width refers to 160 MHz compared to 80 MHz for general WiFi 6 APs. Omada Mesh, Seamless Roaming, and Captive Portal require the use of an Omada SDN controller. Go to https://www.tp-link.com/en/omada-mesh/product-list/ to find all the models supported by Omada mesh technology to find all the models supported by Omada mesh technology, and refer to the User Guides of Omada SDN controllers for configuration methods.Wireless Security Captive Portal Authentication Access Control Wireless Mac Address Filtering Wireless Isolation Between Clients SSID to VLAN Mapping Rogue AP Detection 802.1X Support WPA-Personal/Enterprise, WPA2-Personal/Enterprise, WPA3-Personal/Enterprise * Omada Mesh, Seamless Roaming, and Captive Portal require the use of an Omada SDN controller. Go to https://www.tp-link.com/en/omada-mesh/product-list/ to find all the models supported by Omada mesh technology to find all the models supported by Omada mesh technology, and refer to the User Guides of Omada SDN controllers for configuration methods.Transmission Power CE:<20 dBm(2.4 GHz, EIRP) <23 dBm(5 GHz, , band1 & band2, EIRP) <30 dBm(5 GHz, , band3, EIRP) FCC: <25 dBm (2.4 GHz) <28 dBm (5 GHz) MANAGEMENT FEATURESOmada App YesCentralized Management Omada Hardware Controller (OC300) Omada Hardware Controller (OC200) Omada Software Controller Omada Cloud-Based Controller Cloud Access Yes. Require the use of OC300, OC200, Omada Cloud-Based Controller, or Omada Software Controller.Email Alerts YesLED ON/OFF Control YesManagement MAC Access Control YesSNMP v1, v2c, v3System Logging Local/Remote SyslogLocal/Remote SyslogSSH YesWeb-based Management HTTP/HTTPSL3 Management YesMulti-site Management YesManagement VLAN YesZero-Touch ProvisioningYes. Require the use of Omada Cloud-Based Controller.OTHERSCertification CE, FCC, RoHSPackage Content EAP673 Ceiling/Wall Mounting Kits Installation Guide System Requirements Microsoft Windows XP, Vista, Windows 7, Windows 8, Windows10, Windows11, LinuxEnvironment Operating Temperature: 040 (32104 ) Storage Temperature: -4070 (-40158 ) Operating Humidity: 1090% RH non-condensing Storage Humidity: 590% RH non-condensing NotesMaximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. Actual wireless data throughput and wireless coverage are not guaranteed and will vary as a result of 1) environmental factors, including building materials, physical objects, and obstacles, 2) network conditions, including local interference, volume and density of traffic, product location, network complexity, and network overhead, and 3) client limitations, including rated performance, location, connection, quality, and client condition.* Zero-Touch Provisioning and Auto Channel Selection and Power Adjustment require the use of Omada Cloud-Based Controller. Go to https://www.tp-link.com/en/omada-cloud-based-controller/product-list/ to confirm which models are compatible with Omada Cloud-Based Controller.** The actual capacity depends on the wireless environment and client traffic and is generally less than the maximum number of client connections.