TP-Link Omada BE9300 Ceiling Mount Tri-Band Wi-Fi 7 Access Point (EAP770)

TP-Link Omada BE9300 Ceiling Mount Tri-Band Wi-Fi 7 Access Point (EAP770)

Price$359

In stock at Umart

Price checked today

Buy at Umart

We may earn a commission if you buy; it doesn't change your price. Check the price at Umart before you buy. How we make money

Price history

Tracking since today

The price hasn't changed since we started tracking it. We'll show its history once it does.

About this product

Brand
TP-Link
Store
Umart
Category
Electronics > Networking > Bridges & Routers > Wireless Access Points
SKU
87660

SPECIFICATIONS:

HARDWARE FEATURES
Interface 1× 2.5G Ethernet Port
Button Reset
Power Supply 802.3at PoE or 12V/2.5A DC
Max. Power Consumption • 24.05 W (For PoE)
• 20.92 W (For DC)
Dimensions ( W x D x H ) 8.7 × 8.7 × 1.3 in (220 × 220 × 32.5 mm)
Antenna • 2.4 GHz: 2× 4.0 dBi
• 5 GHz: 2× 5.0 dBi
• 6 GHz: 2× 5.0 dBi
Bluetooth 1 × 4.0 dBi, Bluetooth 5.2
*Firmware update may be required.
Mounting Ceiling / Wall /Junction Box Mounting (Kits Included)
WIRELESS FEATURES
Coverage 1500 ft² (140㎡)*
* Coverage value is calculated based on laboratory testing. Actual coverage is not guaranteed and will vary as a result of client limitations and environmental factors.
Concurrent Clients 380+**
**The actual capacity depends on the wireless environment and client traffic and is generally less than the maximum number of client connections.
Wireless Standards IEEE 802.11 a/b/g/n/ac/ax/be
Frequency 6 GHz, 5 GHz, and 2.4 GHz
Signal Rate 688 Mbps (2.4 GHz) + 2882 Mbps (5 GHz) + 5765 Mbps (6 GHz)*
* Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. The 320 MHz bandwidth is only available on the 6 GHz band. Simultaneously, the 320 MHz bandwidth on the 6 GHz band and 160 MHz bandwidth on the 5 GHz band may be unavailable in some regions/countries due to regulatory restrictions. Actual wireless data throughput, wireless coverage, and connected devices are not guaranteed and will vary as a result of internet service provider factors, network conditions, client limitations, and environmental factors, including building materials, obstacles, volume and density of traffic, and client location.
Wireless Functions • MLO*
• 4K-QAM*
• MU-MIMO*
• 320 MHz Bandwidth*
• Mesh**
• Seamless Roaming(802.11k/v/r)**
• BBS Coloring*
• OFDMA*
• Load Balance
• Band Steering
• Beamforming
• Airtime Fairness
• Multiple SSIDS:24(8 on each band)
• Wireless Schedule
• Reboot Schedule
• QoS(WMM)
• Rate Limit
• Static IP/Dynamic IP
• RADIUS Accounting
• MAC Authentication
* Use of Wi-Fi 7 (802.11be), Wi-Fi 6 (802.11ax), and features including Multi-Link Operation (MLO), 320 MHz Bandwidth, 6 GHz, 4K-QAM, Multi-RUs, OFDMA, and MU-MIMO requires clients to also support the corresponding features.
** Omada Mesh, Seamless Roaming, Captive Portal, and Cloud Access require the use of an Omada controller.
Wireless Security • Captive Portal Authentication*
• Access Control
• Maximum number of MAC Filter: 4,000
• Wireless Isolation Between Clients
• VLAN
• Rogue AP Detection
• WPA-Personal/Enterprise, WPA2-Personal/Enterprise, WPA3-Personal/Enterprise
* Omada Mesh, Seamless Roaming, Captive Portal, and Cloud Access require the use of an Omada controller.
Transmission Power < 20 dBm (2.4 GHz, EIRP)
< 23 dBm (5 GHz, band 1&band 2, EIRP)
< 28 dBm (5 GHz, band 3, EIRP)
< 23dBm (6 GHz, EIRP)
MANAGEMENT FEATURES
Omada App Yes
Centralized Management • Omada Cloud-Based Controller
• Omada Hardware Controller
• Omada Software Controller
Cloud Access Yes. Require the use of an Omada controller.
Email Alerts Yes
LED ON/OFF Control Yes
Management MAC Access Control Yes
SNMP v1, v2c, v3
System Logging Local/Remote Syslog Yes
Web-based Management Yes
OTHERS
Certification CE, FCC, RoHS, IC
Package Content • Omada Ceiling Mount Accsee Point EAP770
• Installation Guide
• Power Adapter
• Ceiling/Wall/Junction Box Mounting Kits
Environment • Operating Temperature: 0 °C–40 °C (32 °F–104 °F);
• Storage Temperature: -40 °C–70 °C (-40 °F–158 °F);
• Operating Humidity: 10%–90% non-condensing;
• Storage Humidity: 5%–90% non-condensing;