TP-Link Omada BE9300 Wall Plate 6-Stream Tri-Band Wi-Fi 7 Access Point (EAP775-Wall)

SPECIFICATIONS:HARDWARE FEATURESInterface Uplink: 1 2.5G Ethernet Port Downlink: 1 2.5G Ethernet Port + 3 Gigabit Ethernet Ports (Two Gigabit ports offer flexible PoE Out, providing either dual PoE or single PoE+ output.The PoE Out feature requires 802.3bt input.) Physical Security Lock YesButton ResetPower Supply 802.3at/bt PoEPoE Out Two Gigabit ports offer flexible PoE Out, providing either dual PoE or single PoE+ output.The PoE Out feature requires 802.3bt input. Max. Power Consumption 43.35Wwith 25W PoE Out)Dimensions ( W x D x H ) 6.8 3.6 1.6 in (172.9 91.2 41.3 mm)Antenna 6 Internal Antennas 2.4 GHz: 2 5 dBi 5 GHz: 2 5.5 dBi 6 GHz: 2 5.5 dBi Bluetooth V5.2Mounting Wall Mounting (Kits included)WIRELESS FEATURESCoverage 1050 ft (100 m)* Coverage value is calculated based on laboratory testing. Actual coverage is not guaranteed and will vary as a result of client limitations and environmental factors.Concurrent Clients 380+* The actual capacity depends on the wireless environment and client traffic and is generally less than the maximum number of client connections.Wireless Standards IEEE 802.11 a/b/g/n/ac/ax/beFrequency 2.4 GHz, 5 GHz, and 6 GHzSignal Rate 6 GHz: Up to 5765 Mbps 5 GHz: Up to 2882 Mbps 2.4 GHz: Up to 688 Mbps Wireless Functions MLO 4K-QAM Multi-RUs* 320 MHz Bandwidth* 24 SSIDs (Up to 8 SSIDs on each band) Enable/Disable Wireless Radio Automatic Channel Assignment Transmit Power Control (Adjust Transmit Power on dBm) QoS(WMM) Seamless Roaming** Beamforming Rate Limit (Based on SSID/Client) Load Balance Airtime Fairness Band Steering Reboot Schedule Wireless Schedule RADIUS Accounting MAC Authentication Wireless Statistics Static IP/Dynamic IP *Use of Wi-Fi 7 (802.11be) and features including 320 MHz Bandwidth, 4K-QAM, Multi-RUs, OFDMA and MU-MIMO requires clients to also support the corresponding features.*Omada mesh, seamless roaming, captive portal, and cloud access require the use of an Omada SDN controller. Please refer to the User Guides of Omada SDN controllers for configuration methods.Wireless Security Captive Portal Authentication Access Control Wireless Mac Address Filtering Wireless Isolation Between Clients VLAN Rogue AP Detection WPA-Personal/Enterprise, WPA2-Personal/Enterprise, WPA3-Personal/Enterprise *Omada mesh, seamless roaming, captive portal, and cloud access require the use of an Omada SDN controller. Please refer to the User Guides of Omada SDN controllers for configuration methods.Transmission Power 6-20 dBm (2.4 GHz, ERIP)6-23 dBm (5 GHz, U-NII-1, U-NII-2A, ERIP)6-27.5 dBm (5 GHz, U-NII-2C, ERIP) 6-23 dBm (6 GHz,ERIP) MANAGEMENT FEATURESOmada App YesCentralized Management Omada Hardware Controller Omada Software Controller Omada Cloud-Based Controller Cloud Access Yes. Requiring the use of an Omad Controller.Email Alerts YesLED ON/OFF Control YesManagement MAC Access Control YesSNMP v1, v2c, v3System Logging Local/Remote Syslog System LogSSH YesWeb-based Management YesL3 Management YesMulti-site Management YesManagement VLAN YesZero-Touch Provisioning Yes. Requiring the use of Omada Cloud-Based Controller.OTHERSCertification CE, RoHSPackage Content EAP775-Wall Paintable Cover Installation Guide Mounting Kits System Requirements Microsoft Windows XP, Vista, Windows 7, Windows 8, Windows10, Windows 11, LinuxEnvironment Operating Temperature: 040 (32104 ) Storage Temperature: -4070 (-40158 ) Operating Humidity: 1090% RH non-condensing Storage Humidity: 590% RH non-condensing