TP Link- Omada Multi-Gigabit VPN Router (ER7412-M2)

TP Link- Omada Multi-Gigabit VPN RouterOmada Multi-Gigabit VPN RouterQuad-core @2.0GHz CPU2 2.5G RJ45 WAN/LAN ports 10 Gigabit WAN/LAN Ports (2 SFP, 8 RJ45)1 USB 3.0 Port (Supports USB storage, and LTE backup with LTE dongle)Up to 11 WAN portsMulti-WAN Load Balancing raises the utilization rate of multi-line broadbandHigh-security SSL/ IPSec / GRE / WireGuard / PPTP / L2TP VPN & OpenVPNCentralized cloud management via the web or the Omada appStandalone management via web, CLI, SNMP, and RMONDoS defense, IP/MAC/URL filtering, DPI, and IPS/IDS for enhanced security.SPECIFICATIONS:SECURITYAccess Control Source/Destination IP-Based ACL Stateful ACL IPv4/IPv6 ACL National Based ACL Filtering WEB Group Filtering URL Filtering Web Security ARP Inspection Sending GARP Packets ARP Scanning IP-MAC Binding Attack Defense TCP/UDP/ICMP Flood Defense Block TCP Scan (Stealth FIN/Xmas/Null) Block Ping from WAN HARDWARE FEATURESStandards and Protocols IEEE 802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z, IEEE 802.3x, IEEE802.1q TCP/IP, DHCP, ICMP, NAT, PPPoE, NTP, HTTP, HTTPS, DNS, IPSec, PPTP, L2TP, OpenVPN, WireGuard VPN, GRE VPN, SNMP Interface 1 2.5G RJ45 WAN/LAN Port 1 2.5G RJ45 WAN/LAN Port 2 Gigabit SFP WAN/LAN Ports 8 Gigabit RJ45 WAN/LAN Ports 1 RJ45 Console Port 1 USB 3.0 Port (Supports USB storage, and LTE backup with LTE dongle) Network Media 10BASE-T: UTP category 3, 4, 5 cable (Max 100 m) EIA/TIA-568 100 STP (Max 100 m) 100BASE-TX: UTP category 5, 5e cable (Max 100 m) EIA/TIA-568 100 STP (Max 100 m) 1000BASE-T: UTP category 5, 5e, 6 cable (Max 100 m) 2500BASE-T: UTP category 5e, 6 cable (Max 100 m) Button Reset ButtonPower Supply 100240 VAC, 50/60 HzFlash 128MB NANDDRAM 1 GB DDR4Dimensions ( W x D x H ) 11.67.11.7 in (29418044 mm)Protection 4 kV surge protectionEnclosure SteelMounting Desktop Rackmountable Max Power Consumption 18.5W (With USB 3.0 connected)PERFORMANCEGRE Unencrypted: 1153.0 Mbps Encrypted: 559.2 Mbps WireGuard VPN 771.6 MbpsConcurrent Session 1,000,000New Sessions /Second 7,000NAT (Static IP) 2345.71 Mbps / 2351.22 MbpsNAT(DHCP) 2353.41 Mbps / 2353.40 MbpsNAT(PPPoE) 2336.52 Mbps / 2336.08 MbpsNAT (L2TP) 1937.53 Mbps / 1761.82 MbpsNAT (PPTP) 1757.54 Mbps / 2011.33 MbpsIPsec VPN Throughput ESP-SHA1-AES256: 1125.60 Mbps ESP-SHA256-AES256: 1133.1 Mbps ESP-SHA384-AES256: 1126.6 Mbps ESP-SHA512-AES256: 1132.8 MbpsOpenVPN UDP: 266.2 MbpsL2TP VPN Throughput Unencrypted: 2724.5 Mbps Encrypted: 1018.4Mbps PPTP VPN Throughput Unencrypted: 3035 Mbps Encrypted: 534.6 Mbps SSL VPN Throughput 263.1 Mbps66 Byte Packet forwarding rate 1833 Mbps / 1835 Mbps1,518 Byte Packet forwarding rate 2461 Mbps / 2461 MbpsBASIC FUNCTIONSWAN Connection Type Static IP/Dynamic IP PPPoE (supports MRU Configuration) PPTP L2TP Mobile Broadband: 4G/3G modem for backup via USB port MAC Clone Modify WAN/LAN MAC AddressDHCP DHCP Server DHCPv6 PD Server (only in Standalone Mode) DHCP Options Customization DHCP Address Reservation Multi-IP Interfaces Multi-Net DHCP IPv6 StaticIP / SLAAC / DHCPv6 / PPPoE / 6to4Tunnel / PassThrough / Non-Address modeVLAN 802.1Q VLANIPTV IGMP v2/v3 Proxy, Custom Mode, Bridge ModeADVANCED FUNCTIONSAdvanced Routing Static Routing Policy Routing RIP (available in Standalone Mode) OSPF (available in Standalone Mode)Bandwidth Control IP/Port-based Bandwidth ControlLoad Balance Intelligent Load Balance Application Optimized Routing Link Backup (Timing, Failover) Online Detection NAT One-to-One NAT Multi-Net NAT Virtual Server Port Triggering NAT-DMZ FTP/H.323/SIP/IPSec/PPTP ALG UPnP Session Limit IP-based Session LimitVPNGRE Only in Standalone ModeSSL VPN 80 TunnelsIPsec VPN 150 IPSec VPN Tunnels LAN-to-LAN, Client-to-LAN Main, Aggressive Negotiation Mode DES, 3DES, AES128, AES192, AES256 Encryption Algorithm IPsec Failover IKE v1/v2 MD5, SHA1, SHA2-384 and SHA2-512 Authentication Algorithm NAT Traversal (NAT-T) Dead Peer Detection (DPD) Perfect Forward Secrecy (PFS) PPTP VPN PPTP VPN Server PPTP VPN Client (15)** 150 Tunnels PPTP with MPPE Encryption L2TP VPN L2TP VPN Server L2TP VPN Client (15)** 150 Tunnels L2TP over IPSec OpenVPN OpenVPN Server OpenVPN Client (11)** 121 OpenVPN Tunnels "Certificate + Account" Mode Full Mode AUTHENTICATIONWeb Authentication No Authentication Simple Password Hotspot (Local User/Voucher*/SMS*/Radius*) External Radius Server External Portal Server* LDAP MANAGEMENTOmada App Yes. Requiring the use of Omada Hardware Controller, Omada Cloud-Based Controller, or Omada Software Controller.Centralized Management Omada Cloud-Based Controller Omada Hardware Controller Omada Software Controller Cloud Access Yes. Requiring the use of Omada Hardware Controller, Omada Cloud-Based Controller, or Omada Software Controller.Service Dynamic DNS (Dyndns, No-IP, Peanuthull, Comexe, DDNS Customization)Maintenance Web Management Interface Remote Management Export & Import Configuration SNMP v1/v2c/v3* Diagnostics (Ping & Traceroute) NTP Synchronize Port Mirroring CLI (only in Standalone Mode) Syslog Support Zero-Touch Provisioning Yes. Requiring the use of Omada Cloud-Based Controller.Management Features Automatic Device Discovery* Batch Configuration* Batch Firmware Upgrading* Intelligent Network Monitoring* Abnormal Event Warnings* Unified Configuration* Reboot Schedule* OTHERSCertification CE, FCCPackage Contents ER7412-M2 Power Cord Quick Installation Guide Rackmount Kit RJ45 Console Cord System Requirements Microsoft Windows 98SE, NT, 2000, XP, Vista or Windows 7/8/8.1/10/11 MAC OS, NetWare, UNIX or LinuxEnvironment Operating Temperature: 045 (32113 ); Storage Temperature: -4070 (-40158 ) Operating Humidity: 1090% RH non-condensing Storage Humidity: 590% non-condensing Notes*These functions require the use of the Omada SDN Controller. Zero-Touch Provisioning requires the use of the Omada Cloud-Based Controller. Go to the Omada Cloud-Based Controller Product List to find all the models supported by the Omada Cloud-Based Controller.**ER7412-M2 can work as a VPN client and can connect with up to 32 PPTP/L2TP VPN servers and 10 OpenVPN servers.LAN MAC Address can be modified only in Standalone Mode.These functions are supported only in Standalone Mode.At least one WAN/LAN port needs to function as a LAN port.