Truck TPMS with High-Pressure Flow-Thru 34x Sensors 0-188 PSI

Truck TPMS Tyre Pressure Monitoring System with High-Pressure Flow-Thru Sensors 0-188 PSI

The Truck TPMS Tyre Pressure Monitoring System with High-Pressure Flow-Thru Sensors (0188 PSI) delivers real-time tyre pressure and temperature monitoring for up to 38 tyres, helping prevent blowouts and improve fuel efficiency. Designed for heavy-duty trucks, trailers, and commercial vehicles, it features a large LCD display, rechargeable battery, and five safety alarm modes for reliable on-road protection.

PRODUCT FEATURES

Real-time Monitoring

Provides real-time pressure and temperature for each tyre, which prevents dangerous blowouts, improves fuel efficiency, extends tyre life through even wear. Monitor your tyre pressure accurately from 0 to 189 PSI and temperature data within 1.5 PSI or 3F accuracy.

Monitors up to 38 tyres

Perfect for Heavy-duty Commercial Vehicles, B-Doubles, Heavy Trucks, Semi-trucks, Tractor-Trailer, etc.

High Pressure Flow-Thru Sensors (0-188 PSI)

It comes with High Pressure Flow-Thru Sensors that helps you add or adjust tire pressure without removing the sensor. Accurately detects tyre pressures from 0 to 188 PSI these are designed for RVs, trailers, or commercial trucks, where pressures might exceed 100 PSI.

Large LCD Screen

With a large 3.5 inch LCD screen, this tpms tire pressure monitor system ensures visible and audible warning when abnormal conditions occur.

Connecting/Disconnecting Trailer

When the trailer is not connected to the tractor, press the ""LINK"" and ""-"" buttons at the same time to remove temporarily. Press the ""LINK"" and ""+"" buttons at the same time when the trailer is connected again to the tractor.

Repeater Installation

To overcome signal range limitations we highly recommend installing a repeater in the battery box of every trailer. Repeater is sold separately.

Built-in Rechargeable Battery.

The monitor has a built-in 850mAh lithium-ion rechargeable battery which will function for up to 60 hours before requiring a re-charge.

Easy Sensor Programming

Programming the sensors is easy and you can do it even before installing the sensors.

Power-Saving Mode

When your vehicle is parked and stationary for 10 minutes, the monitor goes into power saving mode and will automatically turn on as soon as vibration is detected.

5 Alarms Modes for Enhanced Safety

• High-Pressure Alarm: Triggers if a tyre pressure exceeds a safe, pre-set threshold, which can be caused by heat build-up or overinflation.
• Low-Pressure Alarm: Alerts the driver when tyre pressure drops below a minimum safe level, which is a key safety feature to prevent underinflation, potential tyre damage, and accidents.
• High-Temperature Alarm: Warns if the internal temperature of a tyre exceeds a certain limit, often an indication of overwork, underinflation, or a mechanical issue.
• Fast Leakage Alarm: Provides an immediate warning in the event of a quick loss of air pressure, such as from a puncture.