Ubiquiti Access Reader G2 Compact 2nd Gen NFC Card Reader (UA-G2)

Brand:Ubiquiti

Ubiquiti Access Reader G2 Compact 2nd Gen NFC Card Reader (UA-G2)

Price $219

Sold by PC Byte In stock

Same price since 17 Nov

Unchanged since we started tracking

Price updated today Price history

Buy at PC Byte

We may earn a commission at no cost to you. How it works

Price history

Tracking since today

The price hasn't changed since we started tracking it. We'll show its history once it does.

Available at 3 stores

Stores may pay us a commission when you buy; it doesn't affect the order or your price. Learn more

About this product

Brand
Ubiquiti
Store
PC Byte
Category
Electronics > Communications > Intercoms > Video Door Intercoms
SKU
75818

SPECIFICATIONS

MECHANICALDimensions93 x 40 x 36.5 mm (3.7 x 1.6 x 1.4")Weight82 g (2.9 oz)Enclosure materialPolycarbonate, glassMountingIn wall, gang boxWeatherproofingIP55HARDWARENetworking interface(1) 10/100 MbE RJ45 portConnectivityBLE 4.1Power methodPoEUL 294 Power-limited Class 2 PSUUL 60950-1/62368-1 LPS/PS2 PSUSupported voltage range48V DCMax. power consumption5WESD/EMP protectionAir: 15kV, contact: 8kVSensorsProximity sensorSpeaker(1) 8 ohm, 0.7WLEDsR/G/B/WButton(1) Factory-resetNFC frequency13.56 MHzNFC read range< 30 mmNFC standardsISO 14443A, 14443B, 15693NFC technologyNFC Tag 1,2,3,4,5MIFARE ClassicMIFAREPlusMIFARE UltralightMIFARE DESFireOperating environmentOutdoor useOperating temperature-30 to 45 C (-22 to 113 F)Operating humidity5 to 90% noncondensingUL 294 levelDestructive attack: Level ILine security: Level IEndurance: Level IStandby power: Level IUL 294 statementCompliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.PoE cabling requirementsCable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm2) for patch cords; 24 AWG (0.21 mm2) for horizontal or riser cable.CAN/ULC-60839-11-1 GradeGrade assignment: ICertificationsCE, FCC, IC, UL 294, CAN/ULC-60839-11-1LEDSystemSteady blue: Adopted/device is readySteady white: Pending adoptionBlinking white/blue: Upgrading firmwareStrobing red: Emergency lockdownSOFTWAREManagement applicationUniFi Access: Version 1.5.9 and later