Ubiquiti Door Hub Mini (UA-Hub-Door-Mini)

SPECIFICATIONS

OVERVIEWDimensions113 x 66 x 27.6 mm (4.4 x 2.6 x 1.1") Supported Doors1 Maximum User Count3,000 Input Terminals(1) Door exit request (1) Door position Power MethodPoE++ UL 294 Power-limited Class 2 PSU UL 60950-1/62368-1 LPS/PS2 PSU NDAA Compliant UL 294 LevelDestructive attack: Level I Line security: Level I Endurance: Level I Standby power: Level I MECHANICALWeight190 g (6.7 oz) Enclosure MaterialPolycarbonate, metal MountingDIN-rail (Included) HARDWAREDry Output Relay30V DC, 1A Wet Output Relay12V DC, 1A Indoor and Outdoor UseIndoor only Ambient Operating Temperature0 to 40 C (32 to 104 F) Ambient Operating Humidity5 to 90% noncondensing Networking Interface(3) GbE RJ45 ports PoE Interface(1) PoE++ input, 50V DC, 1A (2) PoE+ outputs, 50V DC, 30W per port (Max 45W aggregated) Max. Power Consumption19W (Without PoE output) 50W (With PoE output) LEDsW/B Learn More Buttons(1) Factory reset (1) Dry/Wet switch Recommend Max. Cable LengthUA-Lock-Electric (400mA) 24 AWG length: 25 m (82 ft) 22 AWG length: 42 m (138 ft) 20 AWG length: 66 m (217 ft) 18 UACC-Cable-DoorLockRelay length: 100 m (328 ft) UA-Lock-Magnetic-540kg (500mA) 24 AWG length: 12 m (29 ft) 22 AWG length: 20 m (66 ft) 20 AWG length: 30 m (98 ft) 18 UACC-Cable-DoorLockRelay length: 46 m (262 ft) UA-Lock-Magnetic-270kg (800mA) 24 AWG length: 12 m (29 ft) 22 AWG length: 20 m (98 ft) 20 AWG length: 30 m (167 ft) 18 UACC-Cable-DoorLockRelay length: 46 m (151 ft) Other locks (1A) 24 AWG length: 9 m (30 ft) 22 AWG length: 15 m (49 ft) 20 AWG length: 24 m (79 ft) 18 UACC-Cable-DoorLockRelay length: 36 m (118 ft) PoE Cabling RequirementsCat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm ) for patch cords; 24 AWG (0.21 mm ) for horizontal or riser cable. UL 294 StatementCompliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits. CAN/ULC-60839-11-1 GradeGrade assignment: I CertificationsCE, FCC, IC, UL 294, CAN/ULC-60839-11-1Document number, andissue date and/or revision levelUA-Hub-Door-Mini, V01 SOFTWAREManagement ApplicationAccess Software InformationThe software version can be checked at https://unifi.ui.com