Ubiquiti Enterprise Access Hub
In stock at PC LAN
Price checked today
We may earn a commission if you buy; it doesn't change your price. Check the price at PC LAN before you buy. How we make money
Price history
Tracking since today
The price hasn't changed since we started tracking it. We'll show its history once it does.
About this product
Overview
Enterprise-grade access hub with entry and exit control up to eight doors and battery backup support.
(8) Lock terminals (12V or Dry)
(8+8) Inputs for request-to-exit devices and door position sensors
(8) PoE ports for Access Readers
(4) AUX terminals for chimes, sirens, or door openers
(1) Battery backup input (32–48V)
Technical Specification
Mechanical
Dimensions · 379 x 355 x 105 mm (15 x 14 x 4.1")
Weight
Device: 9.1 kg (20 lb)
Mount: 624 g (1.4 lb)
Enclosure material · SGCC housing with PC cover
Mounting material · SGCC wall mount plate
Hardware
Networking interface · (10) 10/100/1000 Base-T
Power method
Universal input, 100–240V AC, Max. 4.4A, 50/60Hz
32–48V DC Lead Acid Battery, Max. 7.5A @32V
Power supply · AC/DC, internal
Max. power consumption · 240W
PoE interface · (8) PoE (Pins 1, 2+; 3, 6-)
Voltage range PoE mode · 44–57V DC
Total available PoE · 60W
Max. PoE wattage per port · 15.4W
Button · (1) Factory-reset
Digital input
(8) Inputs for request-to-exit devices
(8) Inputs for door position sensors
(1) Emergency
Dry output relay
(8) Lock terminals (12V or Dry)
(4) AUX terminals for advanced setup (Chime/Siren/Door opener)
Powered output relay
Lock: 12V DC, 1A/ Dry
Aux: Dry only
Recommend max. cable length
| 18 AWG UACC-Cable-DoorLockRelay length |
20 AWG length |
22 AWG length |
24 AWG length |
|
|---|---|---|---|---|
| UA-Lock-Electric (400mA) |
100 m (328 ft) |
66 m (217 ft) |
42 m (138 ft) |
25 m (82 ft) |
| UA-Lock-Magnetic-270kg (800mA) |
46 m (151 ft) |
30 m (98 ft) |
20 m (66 ft) |
12 m (29 ft) |
| UA-Lock-Magnetic-540kg (500mA) |
80 m (262 ft) |
51 m (167 ft) |
32 m (105 ft) |
20 m (66 ft) |
| Other locks (1A) |
36 m (118 ft) |
24 m (79 ft) |
15 m (49 ft) |
9 m (30 ft) |
Operating environment · Indoor use only
Ambient operating temperature · 0 to 40° C (32 to 104° F)
Ambient operating humidity · 5 to 95% noncondensing
Software information · The software version of a product can be checked at https://unifi.ui.com
UL 294 level
Destructive attack: Level I
Line security: Level I
Endurance: Level I
Standby power: Level I
UL 294 statement
Compliance with IEEE 802.3 specifications was not verified as part of UL 294.
The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
PoE cabling requirements
Cable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.
The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm 2 ) for patch cords; 24 AWG (0.21 mm 2 ) for horizontal or riser cable.
CAN/ULC-60839-11-1 Grade · Grade assignment: I
Certifications · CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
Document number, and issue date and/or revision level · EAH-8, Ver 01
LEDs
PoE in
Steady white: Pending adoption
Steady blue: Adopted
Alternating white/blue: Firmware updating
PoE out · Blinking white: Active signal
Input terminals · Steady white: Active signal
Output relays · Steady white: Relay triggered
Software
Management application · UniFi Access: Version 1.22.17 and later