Ubiquiti G3 Starter Kit Pro (UA-G3-SK-PRO)

SPECIFICATIONS

OVERVIEWIn the Box(1) Door Hub (1) G3 Reader Pro (1) G3 Reader (2) Pocket Keyfobs Touch Pass10 free 1-year Touch Passes included DOOR HUBDimensions174.9 x 126 x 32.9 mm (6.9 x 5 x 1.3") Supported Doors1 Maximum User Count6,000 Input Terminals(2) Door exit request (1) Door position (1) Emergency Power MethodPoE++ UL 294 Power-limited Class 2 PSU UL 60950-1/62368-1 LPS/PS2 PSU Weight363 g (12.8 oz) Enclosure MaterialPolycarbonate Mount MaterialPolycarbonate MountingDIN-rail (Included) Networking Interface(5) 10/100/1000 Base-T PoE Interface(1) PoE++ input, 50V DC, 1A (4) PoE outputs, 50V DC, 30W per port (Max 45W aggregated) Max. Power Consumption30W (Without PoE output) 50W (With PoE output) Digital InputRequest to exit, request to enter, remote release, door position sensor Dry Output RelayLock: 30V DC, 1A Aux: 30V DC, 1A Powered Output RelayLock: 12V DC, 1A Aux: 12V DC, 0.33A 12V DC, 0.33A LEDsB/W Button(1) Factory reset Recommend Max. Cable LengthUA-Lock-Electric (400mA) 24 AWG length: 25 m (82 ft) 22 AWG length: 42 m (138 ft) 20 AWG length: 66 m (217 ft) 18 UACC-Cable-DoorLockRelay length: 100 m (328 ft) UA-Lock-Magnetic-540kg (500mA) 24 AWG length: 20 m (66 ft) 22 AWG length: 32 m (105 ft) 20 AWG length: 51 m (167 ft) 18 UACC-Cable-DoorLockRelay length: 80 m (262 ft) UA-Lock-Magnetic-270kg (800mA) 24 AWG length: 12 m (39 ft) 22 AWG length: 20 m (66 ft) 20 AWG length: 30 m (98 ft) 18 UACC-Cable-DoorLockRelay length: 46 m (151 ft) Other locks (1A) 24 AWG length: 9 m (30 ft) 22 AWG length: 15 m (49 ft) 20 AWG length: 24 m (79 ft) 18 UACC-Cable-DoorLockRelay length: 36 m (118 ft) PoE Cabling RequirementsCat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm ) for patch cords; 24 AWG (0.21 mm ) for horizontal or riser cable. UL 294 LevelDestructive attack: Level I Line security: Level I Endurance: Level I Standby power: Level I UL 294 StatementCompliance with IEEE 802.3 (at or af) specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits. CAN/ULC-60839-11-1 GradeGrade assignment: 1 Ambient Operating Temperature0 to 40 C (32 to 104 F) Ambient Operating Humidity5 to 95% noncondensing CertificationsCE, FCC, IC, UL 294, CAN/ULC-60839-11-1 Management ApplicationUniFi Access Software InformationThe software version can be checked at https://unifi.ui.com Document number, and issue date and/or revision levelUA-Hub-Door002, V01 G3 READER PRODimensions160 x 40.4 x 40.55 mm (6.3 x 1.59 x 1.6") Integrated Camera NFC Card & Keyfob Access PIN Access Apple/Google Wallet Mobile Unlock Face Unlock Two-Way Intercom & Doorbell Access WeatherproofingIP55 Weight136 g (4.8 oz) Enclosure MaterialPolycarbonate, glass Mount MaterialAluminum alloy MountingWall, gang-box mount (Included) Angle mount, junction box (Optional) Indoor and Outdoor Use Networking Interface(1) GbE RJ45 port ConnectivityBLE 4.2 NFC Power MethodPoE UL 294 Power-limited Class 2 PSU UL 60950-1/62368-1 LPS/PS2 PSU Max. Power Consumption6W Supported Voltage Range48V DC ESD/EMP ProtectionAir: 15kV, contact: 8kV VideoMax. Frame Rate: 30 FPS Resolution: 2MP 1200 x 1600 (3:4) OpticsResolution: 12 MP (3072 4096) Field of View: H: 98.6, V: 125.7, D: 157.8 SensorsProximity sensor DisplaySize: 120 mm (4.7") diagonal Screen Technology: Capacitive touch Luminance: 480 nits (Typical) Screen Orientation: Portrait Resolution: 1280 x 286 px Microphone Speaker(1) Yes, 1.5W LEDsR/G/B/W/Amber Button(1) Factory reset NFC Frequency13.56 MHz NFC Read Range< 30 mm (1.18'') NFC TechnologyISO/IEC 14443A / 14443B / 15693 / 18092 (Ecma 340) MIFARE Classic / MIFARE DESFIRE Sony FeliCa (ID only) NFC Forum tags T1T, T2T, T3T, T4T and T5TECP 2.0 PoE Cabling RequirementsCat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm ) for patch cords; 24 AWG (0.21 mm ) for horizontal or riser cable. Ambient Operating Humidity5 to 90% noncondensing UL 294 LevelDestructive attack: Level I Line security: Level I Endurance: Level I Standby power: Level I UL 294 StatementCompliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits. CAN/ULC-60839-11-1 GradeGrade assignment: I Ambient Operating TemperatureDevice: -30 to 45 C (-22 to 113 F) Display: -10 to 45 C (14 to 113 F) NDAA Compliant CertificationsCE, FCC, IC,UL 294, CAN/ULC-60839-11-1Document number, and issue date and/or revision levelUA-G3-Pro-W/UA-G3-Pro-B, V01 Management ApplicationUniFi Access Software InformationThe software version can be checked at https://unifi.ui.comG3 READERDimensions93 x 40 x 36.5 mm (3.7 x 1.6 x 1.4") NFC Card & Keyfob Access Apple/Google Wallet Mobile Unlock Handwave Request to Exit WeatherproofingIP55 Weight82 g (2.9 oz) Enclosure MaterialPolycarbonate, glass Mount MaterialAluminum alloy MountingIn-wall, gang box (Included) Junction box (Optional) Indoor and Outdoor Use Networking Interface(1) 10/100 MbE RJ45 port ConnectivityBLE 4.1 NFC Power MethodPoE UL 294 Power-limited Class 2 PSU UL 60950-1/62368-1 LPS/PS2 PSU Max. Power Consumption5W Supported Voltage Range48V DC ESD/EMP ProtectionAir: 15kV, contact: 8kV SensorsProximity sensor Speaker(1) Yes, 0.7W LEDsR/G/B/W Button(1) Factory reset NFC Frequency13.56 MHz NFC Read Range< 30 mm (1.18'') NFC TechnologyISO/IEC 14443A / 14443B / 15693 / 18092 (Ecma 340) MIFARE Classic / MIFARE DESFIRE Sony FeliCa (ID only) NFC Forum tags T1T, T2T, T3T, T4T and T5TECP 2.0 PoE Cabling RequirementsCat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm ) for patch cords; 24 AWG (0.21 mm ) for horizontal or riser cable. UL 294 LevelDestructive attack: Level I Line security: Level I Endurance: Level I Standby power: Level I UL 294 StatementCompliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits. CAN/ULC-60839-11-1 Grade Grade assignment: I Ambient Operating Temperature-30 to 45 C (-22 to 113 F) Ambient Operating Humidity5 to 90% noncondensing NDAA Compliant CertificationsCE, FCC, IC, UL 294, CAN/ULC-60839-11-1 Document number, and issue date and/or revision levelUA-G3, V01 Management ApplicationUniFi Access Software InformationThe software version can be checked at https://unifi.ui.com POCKET KEYFOBDimensions84 x 39 x 7.4 mm (3.3 x 1.5 x 0.29") Weight16 g (0.56 oz) Enclosure MaterialPolycarbonate, stainless steel, silicone rubber WeatherproofingIP54 Ambient Operating Humidity10 to 90% noncondensing Ambient Operating Temperature-10 to 45 C (14 to 113 F) NFC Frequency13.56 MHz NFC TechnologyISO/IEC 14443 Type A MIFARE DESFire EV3 4K UniFi Access Proprietary Security Protocol NDAA Compliant CertificationCE