Ubiquiti Gate Hub - White (UA-HUB-GATE)

SPECIFICATIONS

OVERVIEWDimensions175 x 126 x 26 mm (6.9 x 5 x 1") Supported Doors1 gate, 1 side door Maximum User Count6,000 Input Terminals(1) Gate exit request (1) Gate position (1) Side door exit request (1) Side door position (1) Emergency Power MethodPoE++ UL 294 Power-limited Class 2 PSU UL 60950-1/62368-1 LPS/PS2 PSU NDAA Compliant UL 294 LevelDestructive attack: Level I Line security: Level I Endurance: Level I Standby power: Level I MECHANICALWeight460 g (1 lb) Enclosure MaterialPolycarbonate MountingDIN-rail (Included) HARDWAREDigital InputGate exit request, gate position, side door exit request, side door position, emergency Dry Output Relay(2) Operator: rated 30V DC, up to 1A (1) Aux: rated 30V DC, up to 1A Powered Output RelaySide door lock: 12V DC, up to 1A Indoor and Outdoor UseIndoor only: device itself Outdoor: with waterproof junction box Ambient Operating Temperature-30 to 60 C (-22 to 140 F) Ambient Operating Humidity5 to 90% noncondensing Networking Interface(5) 10/100/1000 Base-T PoE Interface(1) PoE++ input, 50V DC, 1A (4) PoE+ outputs, 50V DC, 30W per port(Max 55W aggregated) Max. Power Consumption22W (Without PoE output) 60W (With PoE output) LEDsW/B Buttons(1) Factory reset Recommend Max. Cable LengthUA-Lock-Electric (400mA) 24 AWG length: 25 m (82 ft) 22 AWG length: 42 m (138 ft) 20 AWG length: 66 m (217 ft) 18 UACC-Cable-DoorLockRelay length: 100 m (328 ft) UA-Lock-Magnetic-540kg (500mA) 24 AWG length: 20 m (66 ft) 22 AWG length: 32 m (105 ft) 20 AWG length: 51 m (167 ft) 18 UACC-Cable-DoorLockRelay length: 80 m (262 ft) UA-Lock-Magnetic-270kg (800mA) 24 AWG length: 12 m (39 ft) 22 AWG length: 20 m (66 ft) 20 AWG length: 30 m (98 ft) 18 UACC-Cable-DoorLockRelay length: 46 m (151 ft) Other locks (1A) 24 AWG length: 9 m (30 ft) 22 AWG length: 15 m (49 ft) 20 AWG length: 24 m (79 ft) 18 UACC-Cable-DoorLockRelay length: 36 m (118 ft) PoE Cabling RequirementsCat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm ) for patch cords; 24 AWG (0.21 mm ) for horizontal or riser cable. UL 294 StatementCompliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits. CAN/ULC-60839-11-1 GradeGrade assignment: I CertificationsCE, FCC, IC, UL 294, CAN/ULC-60839-11-1 Document number, and issue date and/or revision levelUA-Hub-Gate, V01 SOFTWAREManagement ApplicationAccess Software InformationThe software version can be checked at https://unifi.ui.com