Ubiquiti Indoor/Outdoor Intercom Terminal (NHU-UA-INTERCOM)
Out of stock at MSY
Price checked today
We may earn a commission if you buy; it doesn't change your price. Check the price at MSY before you buy. How we make money
Price history
Tracking since today
The price hasn't changed since we started tracking it. We'll show its history once it does.
About this product
SPECIFICATIONS
OVERVIEWDimensions324.8 x 113.7 x 28.3 mm (12.8 x 4.5 x 1.1")Integrated Camera NFC Card & Keyfob Access PIN Access Mobile Unlock Two-Way Intercom & Doorbell Access NDAA Compliant UL 294 LevelDestructive attack: Level I Line security: Level I Endurance: Level I Standby power: Level I WeatherproofingIP65 MECHANICALWeightDevice: 965 g (2.1 lb) Bracket: 445 g (1 lb)Enclosure MaterialAluminum alloy, UV-stabilized polycarbonate, glass Mount MaterialPowder-coated stainless steel MountingWall mount, adapter to the gooseneck pedestal (Included)HARDWAREIndoor and Outdoor UseYes Ambient Operating TemperatureDevice: -30 to 60 C (-22 to 140 F) Display: -25 to 60 C (-13 to 140 F) Ambient Operating Humidity5 to 90% noncondensing Networking Interface(1) GbE RJ45 port ConnectivityBLE 4.2 NFC Power MethodPoE UL 294 Power-limited Class 2 PSU UL 60950-1/62368-1 LPS/PS2 PSU Max. Power Consumption13W Supported Voltage Range48V DC SensorsProximity sensor ALS sensor Display177 mm (7") diagonal Touch Screen TechnologyCapacitive multi-touch Display LuminanceMax. 1000 nits (Typical) Screen OrientationPortrait Resolution1024 x 600 px Microphone Speaker NFC Frequency13.56 MHz NFC Read Range< 30 mm (1.18'') NFC TechnologyISO/IEC 14443A / 14443B / 15693 / 18092 (Ecma 340) MIFARE Classic / MIFARE DESFIRE Sony FeliCa (ID only) NFC Forum tags T1T, T2T, T3T, T4T and T5T LEDsAmber Buttons(1) Factory-reset PoE Cabling RequirementsCat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm ) for patch cords; 24 AWG (0.21 mm ) for horizontal or riser cable. UL 294 StatementCompliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits. CAN/ULC-60839-11-1 GradeGrade assignment: I CertificationsCE, FCC, IC, UL 294, CAN/ULC-60839-11-1Document number, and issue date and/or revision levelUA-Intercom, V01 SOFTWAREManagement ApplicationAccess Software InformationThe software version can be checked at https://unifi.ui.com