Ubiquiti UniFi Access Gen 2 Pro Starter Kit - (UA-G2-SK-PRO)

SPECIFICATIONS

UA-HUB-DOORMechanicalDimensions174.9 x 126 x 32.9 mm (6.9 x 5 x 1.3")Weight363 g (12.8 oz)Enclosure materialPolycarbonateMounting materialPolycarbonateHardwareNetworking interface(5) 10/100/1000 Base-TPower methodPoE++UL 294 Power-limited Class 2 PSUUL 60950/62368 LPS/PS2 PSUMax. power consumptionWithout PoE output: 30WWith PoE output: 50WPoE input50V DC, 1APoE outputPoE passthrough, (4) PoE, 50V DC, total 20WButton(1) Factory-resetLEDsSystem: white/blueOutput relays: whiteDigital inputRequest to exit/request to enter/remote release/door position sensorDry output relayLock: 30V DC, 1AAux: 30V DC, 1APowered output relayLock: 12V DC, 1AAux: 12V DC, 0.33A12V DC, 0.33AOperating environmentIndoor use onlyOperating temperature0 to 40 C (32 to 104 F) Operating humidity5 to 95% noncondensingUL 294 levelDestructive attack: Level ILine security: Level IEndurance: Level IStandby power: Level IUL 294 statementCompliance with IEEE 802.3 (at or af) specifications was not verified as part of UL 294.The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.CAN/ULC-60839-11-1 GradeGrade assignment: 1CertificationsCE, FCC, IC, UL 294, CAN/ULC-60839-11-1Document number, and issue date and/or revision levelUA-Hub-Door002, V01Wiring InformationWiring gauge requirements (AWG)PoE cabling requirementsThe minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 24 AWG (0.21 mm2) for horizontal or riser cable.LEDsPoE inSteady blue: Adopted/device is ready Steady white: Pending adoption Blinking white/blue: Upgrading firmwarePoE outOff: Not connected or no data linkSteady blue: Connected and data link onUA-G2-PROMechanicalDimensions160 x 40.4 x 40.55 mm (6.3 x 1.59 x 1.6")Weight136 g (4.8 oz)Enclosure materialPolycarbonate, glassMount materialAluminum alloyMountingWall, gang boxWeatherproofingIP55HardwareNetworking interface(1) 10/100/1,000 MbE RJ45 portConnectivityBLE 4.2NFCPower methodPoESupported voltage range48V DCMax. power consumption6WESD/EMP protectionAir: 15kV, contact: 8kVSensorToF sensorCamera4000 x 3000, 12 MP, 30 FPSMicrophoneYesSpeaker(1) 4 ohm, 1.5WLEDsR/G/B/W FlashButton(1) Factory-resetNFC frequency13.56 MHzNFC read range< 30 mmNFC standardsISO 14443A, 14443B, 15693NFC technologyNFC Tag 1,2,3,4,5MIFARE ClassicMIFAREPlusMIFARE UltralightMIFARE DESFireOperating temperature-10 to 45 C (14 to 113 F)Operating humidity5 to 90% noncondensingCertificationsCE, FCC, ICUA-G2MechanicalDimensions93 x 40 x 36.5 mm (3.7 x 1.6 x 1.4")Weight82 g (2.9 oz)Enclosure materialPolycarbonate, glassMountingIn wall, gang boxWeatherproofingIP55HardwareNetworking interface(1) 10/100 MbE RJ45 portConnectivityBLE 4.1Power methodPoESupported voltage range48V DCMax. power consumption5WESD/EMP protectionAir: 15kV, contact: 8kVSensorsProximity sensorSpeaker(1) 8 ohm, 0.7WLEDsR/G/B/WButton(1) Factory-resetNFC frequency13.56 MHzNFC read range< 30 mmNFC standardsISO 14443A, 14443B, 15693NFC technologyNFC Tag 1,2,3,4,5MIFARE ClassicMIFAREPlusMIFARE UltralightMIFARE DESFireOperating temperature-30 to 45 C (-22 to 113 F)Operating humidity5 to 90% noncondensingCertificationsCE, FCC, ICUA-POCKETMechanicalDimensions84 x 39 x 7.4 mm (3.3 x 1.5 x 0.29")Weight16 g (0.56 oz)Enclosure materialPolycarbonate, stainless steelWeatherproofingIP54HardwareNFC frequency13.56 MHzNFC technologyISO/IEC 14443 Type AMIFARE DESFire EV3 4KUniFi Access Proprietary Security ProtocolOperating temperature-10 to 45 C (14 to 113 F)Operating humidity10 to 90% noncondensingCertificationCE