Ubiquiti UniFi Access Gen 2 Starter Kit (UA-G2-SK)

SPECIFICATIONS

UA-HUB-DOORMECHANICALDimensions174.9 x 126 x 32.9 mm (6.9 x 5 x 1.3")Weight363 g (12.8 oz)Enclosure materialPolycarbonateMounting materialPolycarbonateHARDWARENetworking interface(5) 10/100/1000 Base-TPower methodPoE++UL 294 Power-limited Class 2 PSUUL 60950/62368 LPS/PS2 PSUMax. power consumptionWithout PoE output: 30W WithPoE output: 50WPoE input50V DC, 1APoE outputPoE passthrough, (4) PoE, 50V DC, total 20WButton(1) Factory-resetLEDsSystem: white/blue Output relays: whiteDigital inputRequest to exit/request to enter/remote release/door position sensorDry output relayLock: 30V DC, 1AAux: 30V DC, 1APowered output relayLock: 12V DC, 1AAux: 12V DC, 0.33A12V DC, 0.33AOperating environmentIndoor use onlyOperating temperature0 to 40 C (32to 104 F)Operating humidity5 to 95% noncondensingUL 294 levelDestructive attack: Level ILine security: Level IEndurance: Level IStandby power: Level IUL 294 statementCompliance with IEEE 802.3 (at or af) specifications was not verified as part of UL 294.The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.CAN/ULC-60839-11-1 GradeGrade assignment: 1CertificationsCE, FCC, IC, UL 294, CAN/ULC-60839-11-1Document number, and issue dateand/or revision levelUA-Hub-Door002, V01WIRING INFORMATIONWiring gauge requirements (AWG)PoE cabling requirementsThe minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 24 AWG (0.21 mm2) for horizontal or riser cable.LEDSPoE inSteady blue: Adopted/device is readySteady white: Pending adoptionBlinking white/blue: Upgrading firmwarePoE outOff: Not connected or no data linkSteady blue: Connected and data link onUA-G2MECHANICALDimensions93 x 40 x 36.5 mm (3.7 x 1.6 x 1.4")Weight82 g (2.9 oz)Enclosure materialPolycarbonate, glassMountingIn wall, gang boxWeatherproofingIP55HARDWARENetworking interface(1) 10/100 MbE RJ45 portConnectivityBLE 4.1Power methodPoESupported voltage range48V DCMax. power consumption5WESD/EMP protectionAir: 15kV, contact: 8kVSensorsProximity sensorSpeaker(1) 8 ohm, 0.7WLEDsR/G/B/WButton(1) Factory-resetNFC frequency13.56 MHzNFC read range< 30 mmNFC standardsISO 14443A, 14443B, 15693NFC technologyNFC Tag 1,2,3,4,5MIFARE ClassicMIFAREPlusMIFARE UltralightMIFARE DESFireOperating temperature-30 to 45 C (-22 to 113 F)Operating humidity5 to 90% noncondensingCertificationsCE, FCC, ICUA-CARDMECHANICALDimensions85.6 x 53.98 x 0.84 mm (3.37 x 2.13 x 0.03")Weight5 g (0.18 oz)FormatISO 7810 ID-1NFC frequency13.56 MHzNFC technologyISO/IEC 14443 Type AMIFARE DESFireUniFi Access Proprietary Security Protocol