WIFI Signal Scanner 2.4G/5G WIFI Signal Usage Analyzer Router Management Assistant

Purpose In an environment with too many Wi Fi signals or multiple signals occupying the same frequency interference can result in poor Wi Fi signal quality This assistant allows you to easily see which frequency has the most signal and which is less active enabling you to adjust your Wi Fi signal and switch to a less active frequency to improve communication quality Functions 1 Battery level display in the upper right corner of the screen 2 Built in 600mAh lithium battery operating current approximately 160mA standby time approximately 4 hours 3 Built in lithium battery charging management circuit Charging time is approximately 2 hours 4 Uses a TYPE C interface for convenient charging 5 Charging voltage is 5V A red light indicates charging and a green light indicates full charge 6 2 4 inch TFT color display Instructions for Use 1 Press and hold the button to power on press and hold again to power off 2 Press the button once to start scanning press again to paus scanning 3 The waveform at the top of the screen displays the Wi Fi signals of all frequencies in the 2 4GHz band Normally only the strongest Wi Fi signal is displayed per frequency However if multiple signals exist at the same frequency a number is displayed below the corresponding coordinate scale For example displaying the number 5 indicates that 5 Wi Fi networks are using the same frequency The waveform below the screen corresponds to the 5GHz signal waveform Interpretation is the sam